1968 Aston Martin Db6 MOT Pass Rate
Pass rate for Db6 models manufactured in 1968, based on 689 real MOT test results.
Data from official DVSA MOT testing records
This page shows all Db6 cars tested in 1968. Want to see how cars built in 1968 hold up over time?
View 1968 Aston Martin Db6 vintage page → (87.1% current pass rate)1968 Aston Martin Db6 MOT Analysis
The 1968 Aston Martin Db6 has an MOT pass rate of 88.1% based on 689 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 44,011 miles on the odometer. With a 11.9% failure rate, the 1968 Db6 is rated as "Excellent" for MOT reliability.
The leading cause of MOT failure for the 1968 Aston Martin Db6 is Lamps, reflectors and electrical equipment, responsible for 0.3% of failures. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs range from £5–50. Suspension is the second most common issue at 0.3%. Noise, emissions and leaks follows at 0.1%.
Top failures specific to 1968 models only. The overall Db6 page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Lamps, Reflectors And Electrical Equipment | 0.3% | 2 |
| 2 | Suspension | 0.3% | 2 |
| 3 | Noise, Emissions And Leaks | 0.1% | 1 |
Failures per 10,000 Miles
avg. 44,011 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Lamps & Electrical | 0.07 | 0.3% | 2 |
| Suspension | 0.07 | 0.3% | 2 |
| Noise, emissions and leaks | 0.03 | 0.1% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1968 Aston Martin Db6 has an MOT pass rate of 88.1% based on 689 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 44,011 miles on the odometer. With a 11.9% failure rate, the 1968 Db6 is rated as "Excellent" for MOT reliability.
If you own or are considering buying a 1968 Aston Martin Db6, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to lamps, reflectors and electrical equipment: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test. With relatively low average mileage of 44,011 miles, many of these vehicles are still in good mechanical condition.
Lamps, reflectors and electrical equipment — 0.3% of failures
Lamps, reflectors and electrical equipment issues account for 0.3% of MOT failures on 1968 Aston Martin Db6 models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.
Suspension — 0.3% of failures
Suspension issues account for 0.3% of MOT failures on 1968 Aston Martin Db6 models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Noise, emissions and leaks — 0.1% of failures
Noise, emissions and leaks issues account for 0.1% of MOT failures on 1968 Aston Martin Db6 models. Emissions failures occur when exhaust gases exceed legal limits for carbon monoxide (CO), hydrocarbons (HC), or particulate matter (diesel). Common causes include faulty oxygen sensors, clogged catalytic converters, or DPF issues on diesel vehicles. Typical repair costs: £100–1,000+. Pre-MOT check: If the engine management light is on, get it diagnosed before the MOT. For diesel cars, ensure the DPF has completed a regeneration cycle. Regular servicing and using premium fuel before the test can help.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.