2010 Aston Martin Dbs MOT Pass Rate
Pass rate for Dbs models manufactured in 2010, based on 2,483 real MOT test results.
Data from official DVSA MOT testing records
This page shows all Dbs cars tested in 2010. Want to see how cars built in 2010 hold up over time?
View 2010 Aston Martin Dbs vintage page → (94.0% current pass rate)2010 Aston Martin Dbs MOT Analysis
The 2010 Aston Martin Dbs has an MOT pass rate of 92.2% based on 2,483 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 21,147 miles on the odometer. With a 7.8% failure rate, the 2010 Dbs is rated as "Excellent" for MOT reliability.
The leading cause of MOT failure for the 2010 Aston Martin Dbs is Visibility, responsible for 0.6% of failures. Visibility failures relate to the windscreen, wipers, washers, mirrors, and view-obstructing damage. Cracks in the windscreen swept area, ineffective wipers, or empty washer bottles are common causes. Typical repair costs range from £10–300. Tyres is the second most common issue at 0.5%. Brakes follows at 0.5%.
Top failures specific to 2010 models only. The overall Dbs page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Visibility | 0.6% | 14 |
| 2 | Tyres | 0.5% | 13 |
| 3 | Brakes | 0.5% | 12 |
| 4 | Lamps, Reflectors And Electrical Equipment | 0.3% | 8 |
| 5 | Noise, Emissions And Leaks | 0.2% | 4 |
| 6 | Identification Of The Vehicle | 0.1% | 3 |
| 7 | Body, Chassis, Structure | 0.1% | 2 |
Failures per 10,000 Miles
avg. 21,147 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Visibility | 0.27 | 0.6% | 14 |
| Tyres | 0.25 | 0.5% | 13 |
| Brakes | 0.23 | 0.5% | 12 |
| Lamps & Electrical | 0.15 | 0.3% | 8 |
| Noise, emissions and leaks | 0.08 | 0.2% | 4 |
| Identification of the vehicle | 0.06 | 0.1% | 3 |
| Body & Structure | 0.04 | 0.1% | 2 |
| Steering | 0.02 | 0.0% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2010 Aston Martin Dbs has an MOT pass rate of 92.2% based on 2,483 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 21,147 miles on the odometer. With a 7.8% failure rate, the 2010 Dbs is rated as "Excellent" for MOT reliability.
If you own or are considering buying a 2010 Aston Martin Dbs, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to visibility: Check the windscreen for chips and cracks — damage larger than 10mm in the driver's swept area or 40mm elsewhere will fail. Test washers and wipers. Ensure both door mirrors are intact and adjustable. With relatively low average mileage of 21,147 miles, many of these vehicles are still in good mechanical condition.
Visibility — 0.6% of failures
Visibility issues account for 0.6% of MOT failures on 2010 Aston Martin Dbs models. Visibility failures relate to the windscreen, wipers, washers, mirrors, and view-obstructing damage. Cracks in the windscreen swept area, ineffective wipers, or empty washer bottles are common causes. Typical repair costs: £10–300. Pre-MOT check: Check the windscreen for chips and cracks — damage larger than 10mm in the driver's swept area or 40mm elsewhere will fail. Test washers and wipers. Ensure both door mirrors are intact and adjustable.
Tyres — 0.5% of failures
Tyres issues account for 0.5% of MOT failures on 2010 Aston Martin Dbs models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: £50–200 per tyre. Pre-MOT check: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.
Brakes — 0.5% of failures
Brakes issues account for 0.5% of MOT failures on 2010 Aston Martin Dbs models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.