2010 Aston Martin Unclassified MOT Pass Rate
Pass rate for Unclassified models manufactured in 2010, based on 69 real MOT test results.
Data from official DVSA MOT testing records
2010 Aston Martin Unclassified MOT Analysis
The 2010 Aston Martin Unclassified has an MOT pass rate of 91.3% based on 69 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 28,454 miles on the odometer. With a 8.7% failure rate, the 2010 Unclassified is rated as "Excellent" for MOT reliability.
The leading cause of MOT failure for the 2010 Aston Martin Unclassified is Brakes, responsible for 14.5% of failures. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs range from £150–400. Body, chassis, structure is the second most common issue at 2.9%.
Top failures specific to 2010 models only. The overall Unclassified page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Brakes | 14.5% | 10 |
| 2 | Body, Chassis, Structure | 2.9% | 2 |
Failures per 10,000 Miles
avg. 28,454 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Brakes | 5.09 | 14.5% | 10 |
| Body & Structure | 1.02 | 2.9% | 2 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2010 Aston Martin Unclassified has an MOT pass rate of 91.3% based on 69 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 28,454 miles on the odometer. With a 8.7% failure rate, the 2010 Unclassified is rated as "Excellent" for MOT reliability.
If you own or are considering buying a 2010 Aston Martin Unclassified, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to brakes: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm). With relatively low average mileage of 28,454 miles, many of these vehicles are still in good mechanical condition.
Brakes — 14.5% of failures
Brakes issues account for 14.5% of MOT failures on 2010 Aston Martin Unclassified models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Body, chassis, structure — 2.9% of failures
Body, chassis, structure issues account for 2.9% of MOT failures on 2010 Aston Martin Unclassified models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.