1986 Audi 100 MOT Pass Rate
Pass rate for 100 models manufactured in 1986, based on 227 real MOT test results.
Data from official DVSA MOT testing records
This page shows all 100 cars tested in 1986. Want to see how cars built in 1986 hold up over time?
View 1986 Audi 100 vintage page → (43.9% current pass rate)1986 Audi 100 MOT Analysis
The 1986 Audi 100 has an MOT pass rate of 52.0% based on 227 tests — below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 140,481 miles on the odometer. With a 48.0% failure rate, the 1986 100 is rated as "Poor" for MOT reliability.
The leading cause of MOT failure for the 1986 Audi 100 is Brakes, responsible for 4.0% of failures. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs range from £150–400. Noise, emissions and leaks is the second most common issue at 1.3%.
Top failures specific to 1986 models only. The overall 100 page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Brakes | 4.0% | 9 |
| 2 | Noise, Emissions And Leaks | 1.3% | 3 |
Failures per 10,000 Miles
avg. 140,481 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Brakes | 0.28 | 4.0% | 9 |
| Noise, emissions and leaks | 0.09 | 1.3% | 3 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1986 Audi 100 has an MOT pass rate of 52.0% based on 227 tests — below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 140,481 miles on the odometer. With a 48.0% failure rate, the 1986 100 is rated as "Poor" for MOT reliability.
If you own or are considering buying a 1986 Audi 100, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to brakes: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm). With an average mileage of 140,481 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.
Brakes — 4.0% of failures
Brakes issues account for 4.0% of MOT failures on 1986 Audi 100 models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Noise, emissions and leaks — 1.3% of failures
Noise, emissions and leaks issues account for 1.3% of MOT failures on 1986 Audi 100 models. Emissions failures occur when exhaust gases exceed legal limits for carbon monoxide (CO), hydrocarbons (HC), or particulate matter (diesel). Common causes include faulty oxygen sensors, clogged catalytic converters, or DPF issues on diesel vehicles. Typical repair costs: £100–1,000+. Pre-MOT check: If the engine management light is on, get it diagnosed before the MOT. For diesel cars, ensure the DPF has completed a regeneration cycle. Regular servicing and using premium fuel before the test can help.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.