2010 Audi A3 S Line Sp Edtn Tdi 168 MOT Pass Rate
Pass rate for A3 S Line Sp Edtn Tdi 168 models manufactured in 2010, based on 32 real MOT test results.
Data from official DVSA MOT testing records
2010 Audi A3 S Line Sp Edtn Tdi 168 MOT Analysis
The 2010 Audi A3 S Line Sp Edtn Tdi 168 has an MOT pass rate of 84.4% based on 32 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 66,564 miles on the odometer. With a 15.6% failure rate, the 2010 A3 S Line Sp Edtn Tdi 168 is rated as "Excellent" for MOT reliability.
The leading cause of MOT failure for the 2010 Audi A3 S Line Sp Edtn Tdi 168 is Suspension, responsible for 6.3% of failures. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs range from £200–500. Driver's View of the Road is the second most common issue at 3.1%. Lamps, Reflectors and Electrical Equipment follows at 3.1%.
Top failures specific to 2010 models only. The overall A3 S Line Sp Edtn Tdi 168 page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Suspension | 6.3% | 2 |
| 2 | Driver's View Of The Road | 3.1% | 1 |
| 3 | Lamps, Reflectors And Electrical Equipment | 3.1% | 1 |
Failures per 10,000 Miles
avg. 66,564 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Suspension | 0.94 | 6.3% | 2 |
| Visibility | 0.47 | 3.1% | 1 |
| Lamps & Electrical | 0.47 | 3.1% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2010 Audi A3 S Line Sp Edtn Tdi 168 has an MOT pass rate of 84.4% based on 32 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 66,564 miles on the odometer. With a 15.6% failure rate, the 2010 A3 S Line Sp Edtn Tdi 168 is rated as "Excellent" for MOT reliability.
If you own or are considering buying a 2010 Audi A3 S Line Sp Edtn Tdi 168, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to suspension: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks. At 66,564 average miles, these vehicles are in the mid-range where component wear starts to become a factor.
Suspension — 6.3% of failures
Suspension issues account for 6.3% of MOT failures on 2010 Audi A3 S Line Sp Edtn Tdi 168 models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Driver's View of the Road — 3.1% of failures
Driver's View of the Road issues account for 3.1% of MOT failures on 2010 Audi A3 S Line Sp Edtn Tdi 168 models. Driver's View of the Road issues are a common cause of MOT failure. Regular inspection and maintenance of these components helps ensure your vehicle passes its MOT. Typical repair costs: £100–400. Pre-MOT check: Have this system checked during regular servicing. Look for warning signs like unusual noises, vibrations, or dashboard warning lights.
Lamps, Reflectors and Electrical Equipment — 3.1% of failures
Lamps, Reflectors and Electrical Equipment issues account for 3.1% of MOT failures on 2010 Audi A3 S Line Sp Edtn Tdi 168 models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.