2006 Audi A3 Se S Line Fsi A MOT Pass Rate
Pass rate for A3 Se S Line Fsi A models manufactured in 2006, based on 36 real MOT test results.
Data from official DVSA MOT testing records
2006 Audi A3 Se S Line Fsi A MOT Analysis
The 2006 Audi A3 Se S Line Fsi A has an MOT pass rate of 72.2% based on 36 tests — above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 49,157 miles on the odometer. With a 27.8% failure rate, the 2006 A3 Se S Line Fsi A is rated as "Very Good" for MOT reliability.
The leading cause of MOT failure for the 2006 Audi A3 Se S Line Fsi A is Suspension, responsible for 8.3% of failures. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs range from £200–500. Lamps, Reflectors and Electrical Equipment is the second most common issue at 5.6%. Road Wheels follows at 5.6%.
Top failures specific to 2006 models only. The overall A3 Se S Line Fsi A page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Suspension | 8.3% | 3 |
| 2 | Lamps, Reflectors And Electrical Equipment | 5.6% | 2 |
| 3 | Road Wheels | 5.6% | 2 |
| 4 | Tyres | 2.8% | 1 |
| 5 | Brakes | 2.8% | 1 |
Failures per 10,000 Miles
avg. 49,157 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Suspension | 1.70 | 8.3% | 3 |
| Lamps & Electrical | 1.13 | 5.6% | 2 |
| Wheels | 1.13 | 5.6% | 2 |
| Tyres | 0.57 | 2.8% | 1 |
| Brakes | 0.57 | 2.8% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2006 Audi A3 Se S Line Fsi A has an MOT pass rate of 72.2% based on 36 tests — above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 49,157 miles on the odometer. With a 27.8% failure rate, the 2006 A3 Se S Line Fsi A is rated as "Very Good" for MOT reliability.
If you own or are considering buying a 2006 Audi A3 Se S Line Fsi A, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to suspension: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks. With relatively low average mileage of 49,157 miles, many of these vehicles are still in good mechanical condition.
Suspension — 8.3% of failures
Suspension issues account for 8.3% of MOT failures on 2006 Audi A3 Se S Line Fsi A models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Lamps, Reflectors and Electrical Equipment — 5.6% of failures
Lamps, Reflectors and Electrical Equipment issues account for 5.6% of MOT failures on 2006 Audi A3 Se S Line Fsi A models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.
Road Wheels — 5.6% of failures
Road Wheels issues account for 5.6% of MOT failures on 2006 Audi A3 Se S Line Fsi A models. Wheel failures include cracked or severely corroded alloy wheels, missing or loose wheel nuts, and wheels that are insecurely attached. These are safety-critical and relatively rare compared to tyre failures. Typical repair costs: £100–400 per wheel. Pre-MOT check: Visually inspect wheels for cracks, especially around the spokes and rim. Check that all wheel nuts are present and tightened. Look for signs of impact damage on alloy wheels.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.