2000 Audi Allroad MOT Pass Rate
Pass rate for Allroad models manufactured in 2000, based on 1,957 real MOT test results.
Data from official DVSA MOT testing records
This page shows all Allroad cars tested in 2000. Want to see how cars built in 2000 hold up over time?
View 2000 Audi Allroad vintage page → (54.3% current pass rate)2000 Audi Allroad MOT Analysis
The 2000 Audi Allroad has an MOT pass rate of 53.6% based on 1,957 tests — below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 138,059 miles on the odometer. With a 46.4% failure rate, the 2000 Allroad is rated as "Poor" for MOT reliability.
The leading cause of MOT failure for the 2000 Audi Allroad is Suspension, responsible for 0.1% of failures. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs range from £200–500. Body, chassis, structure is the second most common issue at 0.1%.
Top failures specific to 2000 models only. The overall Allroad page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Suspension | 0.1% | 2 |
| 2 | Body, Chassis, Structure | 0.1% | 1 |
Failures per 10,000 Miles
avg. 138,059 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Suspension | 0.01 | 0.1% | 2 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2000 Audi Allroad has an MOT pass rate of 53.6% based on 1,957 tests — below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 138,059 miles on the odometer. With a 46.4% failure rate, the 2000 Allroad is rated as "Poor" for MOT reliability.
If you own or are considering buying a 2000 Audi Allroad, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to suspension: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks. With an average mileage of 138,059 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.
Suspension — 0.1% of failures
Suspension issues account for 0.1% of MOT failures on 2000 Audi Allroad models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Body, chassis, structure — 0.1% of failures
Body, chassis, structure issues account for 0.1% of MOT failures on 2000 Audi Allroad models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.