Skip to main content
Pass Your MOT

2020 Audi Q5 S Line 50 Tfsi E Quattro Sa MOT Pass Rate

Pass rate for Q5 S Line 50 Tfsi E Quattro Sa models manufactured in 2020, based on 985 real MOT test results.

92.3%
Pass Rate
7.7%
Fail Rate
985
Total Tests
41,410
Avg Mileage

Data from official DVSA MOT testing records

This page shows all Q5 S Line 50 Tfsi E Quattro Sa cars tested in 2020. Want to see how cars built in 2020 hold up over time?

View 2020 Audi Q5 S Line 50 Tfsi E Quattro Sa vintage page → (92.5% current pass rate)

2020 Audi Q5 S Line 50 Tfsi E Quattro Sa MOT Analysis

The 2020 Audi Q5 S Line 50 Tfsi E Quattro Sa has an MOT pass rate of 92.3% based on 985 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 41,410 miles on the odometer. With a 7.7% failure rate, the 2020 Q5 S Line 50 Tfsi E Quattro Sa is rated as "Excellent" for MOT reliability.

The leading cause of MOT failure for the 2020 Audi Q5 S Line 50 Tfsi E Quattro Sa is Tyres, responsible for 3.6% of failures. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs range from £50–200 per tyre. Lamps, reflectors and electrical equipment is the second most common issue at 0.6%. Visibility follows at 0.4%.

Top failures specific to 2020 models only. The overall Q5 S Line 50 Tfsi E Quattro Sa page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Tyres3.6%35
2Lamps, Reflectors And Electrical Equipment0.6%6
3Visibility0.4%4
4Seat Belts And Supplementary Restraint Systems0.3%3
5Brakes0.3%3
6Suspension0.3%3
7Identification Of The Vehicle0.2%2
8Body, Chassis, Structure0.1%1
9Non-component Advisories0.1%1

Failures per 10,000 Miles

avg. 41,410 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Tyres0.86% per 10K miLamps & Electrical0.15% per 10K miVisibility0.10% per 10K miSeat Belts0.07% per 10K miBrakes0.07% per 10K miSuspension0.07% per 10K miIdentification of the vehicle0.05% per 10K miBody & Structure0.02% per 10K miNon-component advisories0.02% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Tyres0.863.6%35
Lamps & Electrical0.150.6%6
Visibility0.100.4%4
Seat Belts0.070.3%3
Brakes0.070.3%3
Suspension0.070.3%3
Identification of the vehicle0.050.2%2
Body & Structure0.020.1%1
Non-component advisories0.020.1%1

Mileage Statistics

41,410
Mean
32,471
Median
23,236
25th Percentile
50,555
75th Percentile
1.86% failures per 10K miles

Mileage-adjusted failure rate — accounts for how much this model year is typically driven.

About This Data

The 2020 Audi Q5 S Line 50 Tfsi E Quattro Sa has an MOT pass rate of 92.3% based on 985 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 41,410 miles on the odometer. With a 7.7% failure rate, the 2020 Q5 S Line 50 Tfsi E Quattro Sa is rated as "Excellent" for MOT reliability.

If you own or are considering buying a 2020 Audi Q5 S Line 50 Tfsi E Quattro Sa, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to tyres: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating. With relatively low average mileage of 41,410 miles, many of these vehicles are still in good mechanical condition.

Tyres — 3.6% of failures

Tyres issues account for 3.6% of MOT failures on 2020 Audi Q5 S Line 50 Tfsi E Quattro Sa models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: £50–200 per tyre. Pre-MOT check: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.

Lamps, reflectors and electrical equipment — 0.6% of failures

Lamps, reflectors and electrical equipment issues account for 0.6% of MOT failures on 2020 Audi Q5 S Line 50 Tfsi E Quattro Sa models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Visibility — 0.4% of failures

Visibility issues account for 0.4% of MOT failures on 2020 Audi Q5 S Line 50 Tfsi E Quattro Sa models. Visibility failures relate to the windscreen, wipers, washers, mirrors, and view-obstructing damage. Cracks in the windscreen swept area, ineffective wipers, or empty washer bottles are common causes. Typical repair costs: £10–300. Pre-MOT check: Check the windscreen for chips and cracks — damage larger than 10mm in the driver's swept area or 40mm elsewhere will fail. Test washers and wipers. Ensure both door mirrors are intact and adjustable.

Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue