2009 Audi S6 MOT Pass Rate
Pass rate for S6 models manufactured in 2009, based on 122 real MOT test results.
Data from official DVSA MOT testing records
2009 Audi S6 MOT Analysis
The 2009 Audi S6 has an MOT pass rate of 83.6% based on 122 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 59,609 miles on the odometer. With a 16.4% failure rate, the 2009 S6 is rated as "Excellent" for MOT reliability.
The leading cause of MOT failure for the 2009 Audi S6 is Suspension, responsible for 4.1% of failures. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs range from £200–500. Body, chassis, structure is the second most common issue at 2.5%. Tyres follows at 2.5%.
Top failures specific to 2009 models only. The overall S6 page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Suspension | 4.1% | 5 |
| 2 | Body, Chassis, Structure | 2.5% | 3 |
| 3 | Tyres | 2.5% | 3 |
| 4 | Brakes | 0.8% | 1 |
| 5 | Noise, Emissions And Leaks | 0.8% | 1 |
| 6 | Visibility | 0.8% | 1 |
Failures per 10,000 Miles
avg. 59,609 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Suspension | 0.69 | 4.1% | 5 |
| Body & Structure | 0.41 | 2.5% | 3 |
| Tyres | 0.41 | 2.5% | 3 |
| Brakes | 0.14 | 0.8% | 1 |
| Noise, emissions and leaks | 0.14 | 0.8% | 1 |
| Visibility | 0.14 | 0.8% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2009 Audi S6 has an MOT pass rate of 83.6% based on 122 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 59,609 miles on the odometer. With a 16.4% failure rate, the 2009 S6 is rated as "Excellent" for MOT reliability.
If you own or are considering buying a 2009 Audi S6, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to suspension: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks. At 59,609 average miles, these vehicles are in the mid-range where component wear starts to become a factor.
Suspension — 4.1% of failures
Suspension issues account for 4.1% of MOT failures on 2009 Audi S6 models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Body, chassis, structure — 2.5% of failures
Body, chassis, structure issues account for 2.5% of MOT failures on 2009 Audi S6 models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Tyres — 2.5% of failures
Tyres issues account for 2.5% of MOT failures on 2009 Audi S6 models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: £50–200 per tyre. Pre-MOT check: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.