1980 Austin Morris Maxi 1750 Hl MOT Pass Rate
Pass rate for Maxi 1750 Hl models manufactured in 1980, based on 66 real MOT test results.
Data from official DVSA MOT testing records
1980 Austin Morris Maxi 1750 Hl MOT Analysis
The 1980 Austin Morris Maxi 1750 Hl has an MOT pass rate of 66.7% based on 66 tests — slightly above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 45,649 miles on the odometer. With a 33.3% failure rate, the 1980 Maxi 1750 Hl is rated as "Good" for MOT reliability.
The leading cause of MOT failure for the 1980 Austin Morris Maxi 1750 Hl is Brakes, responsible for 3.0% of failures. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs range from £150–400. Suspension is the second most common issue at 3.0%. Body, chassis, structure follows at 1.5%.
Top failures specific to 1980 models only. The overall Maxi 1750 Hl page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Brakes | 3.0% | 2 |
| 2 | Suspension | 3.0% | 2 |
| 3 | Body, Chassis, Structure | 1.5% | 1 |
| 4 | Lamps, Reflectors And Electrical Equipment | 1.5% | 1 |
| 5 | Noise, Emissions And Leaks | 1.5% | 1 |
| 6 | Non-component Advisories | 1.5% | 1 |
| 7 | Tyres | 1.5% | 1 |
Failures per 10,000 Miles
avg. 45,649 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Brakes | 0.66 | 3.0% | 2 |
| Suspension | 0.66 | 3.0% | 2 |
| Body & Structure | 0.33 | 1.5% | 1 |
| Lamps & Electrical | 0.33 | 1.5% | 1 |
| Noise, emissions and leaks | 0.33 | 1.5% | 1 |
| Non-component advisories | 0.33 | 1.5% | 1 |
| Tyres | 0.33 | 1.5% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1980 Austin Morris Maxi 1750 Hl has an MOT pass rate of 66.7% based on 66 tests — slightly above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 45,649 miles on the odometer. With a 33.3% failure rate, the 1980 Maxi 1750 Hl is rated as "Good" for MOT reliability.
If you own or are considering buying a 1980 Austin Morris Maxi 1750 Hl, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to brakes: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm). With relatively low average mileage of 45,649 miles, many of these vehicles are still in good mechanical condition.
Brakes — 3.0% of failures
Brakes issues account for 3.0% of MOT failures on 1980 Austin Morris Maxi 1750 Hl models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Suspension — 3.0% of failures
Suspension issues account for 3.0% of MOT failures on 1980 Austin Morris Maxi 1750 Hl models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Body, chassis, structure — 1.5% of failures
Body, chassis, structure issues account for 1.5% of MOT failures on 1980 Austin Morris Maxi 1750 Hl models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.