1962 Austin A35 MOT Pass Rate
Pass rate for A35 models manufactured in 1962, based on 198 real MOT test results.
Data from official DVSA MOT testing records
1962 Austin A35 MOT Analysis
The 1962 Austin A35 has an MOT pass rate of 73.7% based on 198 tests — above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 58,028 miles on the odometer. With a 26.3% failure rate, the 1962 A35 is rated as "Very Good" for MOT reliability.
The leading cause of MOT failure for the 1962 Austin A35 is Brakes, responsible for 2.5% of failures. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs range from £150–400.
Top failures specific to 1962 models only. The overall A35 page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Brakes | 2.5% | 5 |
Failures per 10,000 Miles
avg. 58,028 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Brakes | 0.44 | 2.5% | 5 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1962 Austin A35 has an MOT pass rate of 73.7% based on 198 tests — above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 58,028 miles on the odometer. With a 26.3% failure rate, the 1962 A35 is rated as "Very Good" for MOT reliability.
If you own or are considering buying a 1962 Austin A35, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to brakes: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm). At 58,028 average miles, these vehicles are in the mid-range where component wear starts to become a factor.
Brakes — 2.5% of failures
Brakes issues account for 2.5% of MOT failures on 1962 Austin A35 models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.