1960 Austin A55 MOT Pass Rate
Pass rate for A55 models manufactured in 1960, based on 170 real MOT test results.
Data from official DVSA MOT testing records
1960 Austin A55 MOT Analysis
The 1960 Austin A55 has an MOT pass rate of 80.0% based on 170 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 54,698 miles on the odometer. With a 20.0% failure rate, the 1960 A55 is rated as "Excellent" for MOT reliability.
The leading cause of MOT failure for the 1960 Austin A55 is Body, chassis, structure, responsible for 0.6% of failures. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs range from £100–500+. Brakes is the second most common issue at 0.6%. Speedometer and speed limiter follows at 0.6%.
Top failures specific to 1960 models only. The overall A55 page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Body, Chassis, Structure | 0.6% | 1 |
| 2 | Brakes | 0.6% | 1 |
| 3 | Speedometer And Speed Limiter | 0.6% | 1 |
| 4 | Visibility | 0.6% | 1 |
Failures per 10,000 Miles
avg. 54,698 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Body & Structure | 0.11 | 0.6% | 1 |
| Brakes | 0.11 | 0.6% | 1 |
| Speedometer and speed limiter | 0.11 | 0.6% | 1 |
| Visibility | 0.11 | 0.6% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1960 Austin A55 has an MOT pass rate of 80.0% based on 170 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 54,698 miles on the odometer. With a 20.0% failure rate, the 1960 A55 is rated as "Excellent" for MOT reliability.
If you own or are considering buying a 1960 Austin A55, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to body, chassis, structure: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely. At 54,698 average miles, these vehicles are in the mid-range where component wear starts to become a factor.
Body, chassis, structure — 0.6% of failures
Body, chassis, structure issues account for 0.6% of MOT failures on 1960 Austin A55 models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Brakes — 0.6% of failures
Brakes issues account for 0.6% of MOT failures on 1960 Austin A55 models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Speedometer and speed limiter — 0.6% of failures
Speedometer and speed limiter issues account for 0.6% of MOT failures on 1960 Austin A55 models. Speedometer and speed limiter issues are a common cause of MOT failure. Regular inspection and maintenance of these components helps ensure your vehicle passes its MOT. Typical repair costs: £100–400. Pre-MOT check: Have this system checked during regular servicing. Look for warning signs like unusual noises, vibrations, or dashboard warning lights.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.