1986 Austin Metro City MOT Pass Rate
Pass rate for Metro City models manufactured in 1986, based on 103 real MOT test results.
Data from official DVSA MOT testing records
1986 Austin Metro City MOT Analysis
The 1986 Austin Metro City has an MOT pass rate of 64.1% based on 103 tests — around the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 39,501 miles on the odometer. With a 35.9% failure rate, the 1986 Metro City is rated as "Average" for MOT reliability.
The leading cause of MOT failure for the 1986 Austin Metro City is Lamps, reflectors and electrical equipment, responsible for 11.7% of failures. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs range from £5–50. Body, chassis, structure is the second most common issue at 1.9%. Visibility follows at 1.9%.
Top failures specific to 1986 models only. The overall Metro City page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Lamps, Reflectors And Electrical Equipment | 11.7% | 12 |
| 2 | Body, Chassis, Structure | 1.9% | 2 |
| 3 | Visibility | 1.9% | 2 |
Failures per 10,000 Miles
avg. 39,501 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Lamps & Electrical | 2.95 | 11.7% | 12 |
| Body & Structure | 0.49 | 1.9% | 2 |
| Visibility | 0.49 | 1.9% | 2 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1986 Austin Metro City has an MOT pass rate of 64.1% based on 103 tests — around the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 39,501 miles on the odometer. With a 35.9% failure rate, the 1986 Metro City is rated as "Average" for MOT reliability.
If you own or are considering buying a 1986 Austin Metro City, budget for potential repairs before each MOT. Before your MOT, pay particular attention to lamps, reflectors and electrical equipment: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test. With relatively low average mileage of 39,501 miles, many of these vehicles are still in good mechanical condition.
Lamps, reflectors and electrical equipment — 11.7% of failures
Lamps, reflectors and electrical equipment issues account for 11.7% of MOT failures on 1986 Austin Metro City models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.
Body, chassis, structure — 1.9% of failures
Body, chassis, structure issues account for 1.9% of MOT failures on 1986 Austin Metro City models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Visibility — 1.9% of failures
Visibility issues account for 1.9% of MOT failures on 1986 Austin Metro City models. Visibility failures relate to the windscreen, wipers, washers, mirrors, and view-obstructing damage. Cracks in the windscreen swept area, ineffective wipers, or empty washer bottles are common causes. Typical repair costs: £10–300. Pre-MOT check: Check the windscreen for chips and cracks — damage larger than 10mm in the driver's swept area or 40mm elsewhere will fail. Test washers and wipers. Ensure both door mirrors are intact and adjustable.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.