1987 Austin Mini 1000 City E MOT Pass Rate
Pass rate for Mini 1000 City E models manufactured in 1987, based on 3,233 real MOT test results.
Data from official DVSA MOT testing records
This page shows all Mini 1000 City E cars tested in 1987. Want to see how cars built in 1987 hold up over time?
View 1987 Austin Mini 1000 City E vintage page → (65.0% current pass rate)1987 Austin Mini 1000 City E MOT Analysis
The 1987 Austin Mini 1000 City E has an MOT pass rate of 52.9% based on 3,233 tests — below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 50,634 miles on the odometer. With a 47.1% failure rate, the 1987 Mini 1000 City E is rated as "Poor" for MOT reliability.
The leading cause of MOT failure for the 1987 Austin Mini 1000 City E is Lamps, reflectors and electrical equipment, responsible for 4.8% of failures. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs range from £5–50. Suspension is the second most common issue at 3.2%. Body, chassis, structure follows at 2.2%.
Top failures specific to 1987 models only. The overall Mini 1000 City E page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Lamps, Reflectors And Electrical Equipment | 4.8% | 156 |
| 2 | Suspension | 3.2% | 102 |
| 3 | Body, Chassis, Structure | 2.2% | 70 |
| 4 | Noise, Emissions And Leaks | 2.2% | 70 |
| 5 | Brakes | 1.5% | 49 |
| 6 | Visibility | 1.1% | 37 |
| 7 | Steering | 0.9% | 29 |
| 8 | Identification Of The Vehicle | 0.5% | 16 |
| 9 | Tyres | 0.4% | 14 |
| 10 | Seat Belts And Supplementary Restraint Systems | 0.3% | 10 |
| 11 | Non-component Advisories | 0.2% | 8 |
| 12 | Road Wheels | 0.2% | 8 |
Failures per 10,000 Miles
avg. 50,634 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Lamps & Electrical | 0.95 | 4.8% | 156 |
| Suspension | 0.62 | 3.2% | 102 |
| Body & Structure | 0.43 | 2.2% | 70 |
| Noise, emissions and leaks | 0.43 | 2.2% | 70 |
| Brakes | 0.30 | 1.5% | 49 |
| Visibility | 0.23 | 1.1% | 37 |
| Steering | 0.18 | 0.9% | 29 |
| Identification of the vehicle | 0.10 | 0.5% | 16 |
| Tyres | 0.09 | 0.4% | 14 |
| Seat Belts | 0.06 | 0.3% | 10 |
| Non-component advisories | 0.05 | 0.2% | 8 |
| Wheels | 0.05 | 0.2% | 8 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1987 Austin Mini 1000 City E has an MOT pass rate of 52.9% based on 3,233 tests — below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 50,634 miles on the odometer. With a 47.1% failure rate, the 1987 Mini 1000 City E is rated as "Poor" for MOT reliability.
If you own or are considering buying a 1987 Austin Mini 1000 City E, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to lamps, reflectors and electrical equipment: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test. At 50,634 average miles, these vehicles are in the mid-range where component wear starts to become a factor.
Lamps, reflectors and electrical equipment — 4.8% of failures
Lamps, reflectors and electrical equipment issues account for 4.8% of MOT failures on 1987 Austin Mini 1000 City E models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.
Suspension — 3.2% of failures
Suspension issues account for 3.2% of MOT failures on 1987 Austin Mini 1000 City E models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Body, chassis, structure — 2.2% of failures
Body, chassis, structure issues account for 2.2% of MOT failures on 1987 Austin Mini 1000 City E models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.