Skip to main content
Pass Your MOT

1962 Austin Sprite MOT Pass Rate

Pass rate for Sprite models manufactured in 1962, based on 43 real MOT test results.

69.8%
Pass Rate
30.2%
Fail Rate
43
Total Tests
53,269
Avg Mileage

Data from official DVSA MOT testing records

1962 Austin Sprite MOT Analysis

The 1962 Austin Sprite has an MOT pass rate of 69.8% based on 43 tests — slightly above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 53,269 miles on the odometer. With a 30.2% failure rate, the 1962 Sprite is rated as "Good" for MOT reliability.

The leading cause of MOT failure for the 1962 Austin Sprite is Driver's View of the Road, responsible for 2.3% of failures. Driver's View of the Road issues are a common cause of MOT failure. Regular inspection and maintenance of these components helps ensure your vehicle passes its MOT. Typical repair costs range from £100–400. Exhaust, Fuel and Emissions is the second most common issue at 2.3%. Suspension follows at 2.3%.

⚠ Based on limited data (43 tests)

Top failures specific to 1962 models only. The overall Sprite page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Driver's View Of The Road2.3%1
2Exhaust, Fuel And Emissions2.3%1
3Suspension2.3%1

Failures per 10,000 Miles

avg. 53,269 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Visibility0.44% per 10K miEmissions & Exhaust0.44% per 10K miSuspension0.44% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Visibility0.442.3%1
Emissions & Exhaust0.442.3%1
Suspension0.442.3%1

Mileage Statistics

53,269
Mean
80,162
Median
34,364
25th Percentile
84,499
75th Percentile
5.67% failures per 10K miles

Mileage-adjusted failure rate — accounts for how much this model year is typically driven.

About This Data

The 1962 Austin Sprite has an MOT pass rate of 69.8% based on 43 tests — slightly above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 53,269 miles on the odometer. With a 30.2% failure rate, the 1962 Sprite is rated as "Good" for MOT reliability.

If you own or are considering buying a 1962 Austin Sprite, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to driver's view of the road: Have this system checked during regular servicing. Look for warning signs like unusual noises, vibrations, or dashboard warning lights. At 53,269 average miles, these vehicles are in the mid-range where component wear starts to become a factor.

Driver's View of the Road — 2.3% of failures

Driver's View of the Road issues account for 2.3% of MOT failures on 1962 Austin Sprite models. Driver's View of the Road issues are a common cause of MOT failure. Regular inspection and maintenance of these components helps ensure your vehicle passes its MOT. Typical repair costs: £100–400. Pre-MOT check: Have this system checked during regular servicing. Look for warning signs like unusual noises, vibrations, or dashboard warning lights.

Exhaust, Fuel and Emissions — 2.3% of failures

Exhaust, Fuel and Emissions issues account for 2.3% of MOT failures on 1962 Austin Sprite models. Emissions failures occur when exhaust gases exceed legal limits for carbon monoxide (CO), hydrocarbons (HC), or particulate matter (diesel). Common causes include faulty oxygen sensors, clogged catalytic converters, or DPF issues on diesel vehicles. Typical repair costs: £100–1,000+. Pre-MOT check: If the engine management light is on, get it diagnosed before the MOT. For diesel cars, ensure the DPF has completed a regeneration cycle. Regular servicing and using premium fuel before the test can help.

Suspension — 2.3% of failures

Suspension issues account for 2.3% of MOT failures on 1962 Austin Sprite models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.

Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue