1968 Austin Sprite MOT Pass Rate
Pass rate for Sprite models manufactured in 1968, based on 98 real MOT test results.
Data from official DVSA MOT testing records
1968 Austin Sprite MOT Analysis
The 1968 Austin Sprite has an MOT pass rate of 82.7% based on 98 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 36,185 miles on the odometer. With a 17.3% failure rate, the 1968 Sprite is rated as "Excellent" for MOT reliability.
The leading cause of MOT failure for the 1968 Austin Sprite is Body, Structure and General Items, responsible for 1.0% of failures. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs range from £100–500+. Lamps, Reflectors and Electrical Equipment is the second most common issue at 1.0%.
Top failures specific to 1968 models only. The overall Sprite page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Body, Structure And General Items | 1.0% | 1 |
| 2 | Lamps, Reflectors And Electrical Equipment | 1.0% | 1 |
Failures per 10,000 Miles
avg. 36,185 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Body & Structure | 0.28 | 1.0% | 1 |
| Lamps & Electrical | 0.28 | 1.0% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1968 Austin Sprite has an MOT pass rate of 82.7% based on 98 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 36,185 miles on the odometer. With a 17.3% failure rate, the 1968 Sprite is rated as "Excellent" for MOT reliability.
If you own or are considering buying a 1968 Austin Sprite, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to body, structure and general items: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely. With relatively low average mileage of 36,185 miles, many of these vehicles are still in good mechanical condition.
Body, Structure and General Items — 1.0% of failures
Body, Structure and General Items issues account for 1.0% of MOT failures on 1968 Austin Sprite models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Lamps, Reflectors and Electrical Equipment — 1.0% of failures
Lamps, Reflectors and Electrical Equipment issues account for 1.0% of MOT failures on 1968 Austin Sprite models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.