1986 Bedford Bambi MOT Pass Rate
Pass rate for Bambi models manufactured in 1986, based on 104 real MOT test results.
Data from official DVSA MOT testing records
1986 Bedford Bambi MOT Analysis
The 1986 Bedford Bambi has an MOT pass rate of 64.4% based on 104 tests — around the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 73,254 miles on the odometer. With a 35.6% failure rate, the 1986 Bambi is rated as "Average" for MOT reliability.
The leading cause of MOT failure for the 1986 Bedford Bambi is Suspension, responsible for 5.8% of failures. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs range from £200–500. Visibility is the second most common issue at 5.8%. Brakes follows at 5.8%.
Top failures specific to 1986 models only. The overall Bambi page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Suspension | 5.8% | 6 |
| 2 | Visibility | 5.8% | 6 |
| 3 | Brakes | 5.8% | 6 |
| 4 | Lamps, Reflectors And Electrical Equipment | 3.8% | 4 |
| 5 | Steering | 1.9% | 2 |
| 6 | Tyres | 1.9% | 2 |
| 7 | Body, Chassis, Structure | 1.9% | 2 |
| 8 | Identification Of The Vehicle | 1.9% | 2 |
Failures per 10,000 Miles
avg. 73,254 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Suspension | 0.79 | 5.8% | 6 |
| Visibility | 0.79 | 5.8% | 6 |
| Brakes | 0.79 | 5.8% | 6 |
| Lamps & Electrical | 0.53 | 3.8% | 4 |
| Steering | 0.26 | 1.9% | 2 |
| Tyres | 0.26 | 1.9% | 2 |
| Body & Structure | 0.26 | 1.9% | 2 |
| Identification of the vehicle | 0.26 | 1.9% | 2 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1986 Bedford Bambi has an MOT pass rate of 64.4% based on 104 tests — around the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 73,254 miles on the odometer. With a 35.6% failure rate, the 1986 Bambi is rated as "Average" for MOT reliability.
If you own or are considering buying a 1986 Bedford Bambi, budget for potential repairs before each MOT. Before your MOT, pay particular attention to suspension: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks. At 73,254 average miles, these vehicles are in the mid-range where component wear starts to become a factor.
Suspension — 5.8% of failures
Suspension issues account for 5.8% of MOT failures on 1986 Bedford Bambi models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Visibility — 5.8% of failures
Visibility issues account for 5.8% of MOT failures on 1986 Bedford Bambi models. Visibility failures relate to the windscreen, wipers, washers, mirrors, and view-obstructing damage. Cracks in the windscreen swept area, ineffective wipers, or empty washer bottles are common causes. Typical repair costs: £10–300. Pre-MOT check: Check the windscreen for chips and cracks — damage larger than 10mm in the driver's swept area or 40mm elsewhere will fail. Test washers and wipers. Ensure both door mirrors are intact and adjustable.
Brakes — 5.8% of failures
Brakes issues account for 5.8% of MOT failures on 1986 Bedford Bambi models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.