1976 Bedford Cf MOT Pass Rate
Pass rate for Cf models manufactured in 1976, based on 145 real MOT test results.
Data from official DVSA MOT testing records
1976 Bedford Cf MOT Analysis
The 1976 Bedford Cf has an MOT pass rate of 59.3% based on 145 tests — slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 62,351 miles on the odometer. With a 40.7% failure rate, the 1976 Cf is rated as "Below Average" for MOT reliability.
The leading cause of MOT failure for the 1976 Bedford Cf is Body, chassis, structure, responsible for 0.7% of failures. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs range from £100–500+.
Top failures specific to 1976 models only. The overall Cf page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Body, Chassis, Structure | 0.7% | 1 |
Failures per 10,000 Miles
avg. 62,351 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Body & Structure | 0.11 | 0.7% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1976 Bedford Cf has an MOT pass rate of 59.3% based on 145 tests — slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 62,351 miles on the odometer. With a 40.7% failure rate, the 1976 Cf is rated as "Below Average" for MOT reliability.
If you own or are considering buying a 1976 Bedford Cf, budget for potential repairs before each MOT. Before your MOT, pay particular attention to body, chassis, structure: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely. At 62,351 average miles, these vehicles are in the mid-range where component wear starts to become a factor.
Body, chassis, structure — 0.7% of failures
Body, chassis, structure issues account for 0.7% of MOT failures on 1976 Bedford Cf models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.