1987 Bedford Pick Up MOT Pass Rate
Pass rate for Pick Up models manufactured in 1987, based on 55 real MOT test results.
Data from official DVSA MOT testing records
1987 Bedford Pick Up MOT Analysis
The 1987 Bedford Pick Up has an MOT pass rate of 56.4% based on 55 tests — slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 63,379 miles on the odometer. With a 43.6% failure rate, the 1987 Pick Up is rated as "Below Average" for MOT reliability.
The leading cause of MOT failure for the 1987 Bedford Pick Up is Body, chassis, structure, responsible for 5.5% of failures. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs range from £100–500+. Lamps, reflectors and electrical equipment is the second most common issue at 1.8%. Seat belts and supplementary restraint systems follows at 1.8%.
Top failures specific to 1987 models only. The overall Pick Up page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Body, Chassis, Structure | 5.5% | 3 |
| 2 | Lamps, Reflectors And Electrical Equipment | 1.8% | 1 |
| 3 | Seat Belts And Supplementary Restraint Systems | 1.8% | 1 |
| 4 | Suspension | 1.8% | 1 |
| 5 | Tyres | 1.8% | 1 |
Failures per 10,000 Miles
avg. 63,379 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Body & Structure | 0.86 | 5.5% | 3 |
| Lamps & Electrical | 0.29 | 1.8% | 1 |
| Seat Belts | 0.29 | 1.8% | 1 |
| Suspension | 0.29 | 1.8% | 1 |
| Tyres | 0.29 | 1.8% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1987 Bedford Pick Up has an MOT pass rate of 56.4% based on 55 tests — slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 63,379 miles on the odometer. With a 43.6% failure rate, the 1987 Pick Up is rated as "Below Average" for MOT reliability.
If you own or are considering buying a 1987 Bedford Pick Up, budget for potential repairs before each MOT. Before your MOT, pay particular attention to body, chassis, structure: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely. At 63,379 average miles, these vehicles are in the mid-range where component wear starts to become a factor.
Body, chassis, structure — 5.5% of failures
Body, chassis, structure issues account for 5.5% of MOT failures on 1987 Bedford Pick Up models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Lamps, reflectors and electrical equipment — 1.8% of failures
Lamps, reflectors and electrical equipment issues account for 1.8% of MOT failures on 1987 Bedford Pick Up models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.
Seat belts and supplementary restraint systems — 1.8% of failures
Seat belts and supplementary restraint systems issues account for 1.8% of MOT failures on 1987 Bedford Pick Up models. Seat belt failures include frayed or cut webbing, faulty retractors, buckles that don't latch properly, and missing or damaged anchorages. All fitted seat belts must be functional. Typical repair costs: £50–200 per belt. Pre-MOT check: Pull each seat belt fully out and check for fraying, cuts, or fading. Ensure each belt retracts smoothly and the buckle clicks securely. Check the pre-tensioner warning light on the dashboard.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.