1992 Bedford Rascal MOT Pass Rate
Pass rate for Rascal models manufactured in 1992, based on 34 real MOT test results.
Data from official DVSA MOT testing records
1992 Bedford Rascal MOT Analysis
The 1992 Bedford Rascal has an MOT pass rate of 35.3% based on 34 tests — significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 54,113 miles on the odometer. With a 64.7% failure rate, the 1992 Rascal is rated as "Very Poor" for MOT reliability.
The leading cause of MOT failure for the 1992 Bedford Rascal is Brakes, responsible for 5.9% of failures. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs range from £150–400. Visibility is the second most common issue at 2.9%. Identification of the vehicle follows at 2.9%.
Top failures specific to 1992 models only. The overall Rascal page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Brakes | 5.9% | 2 |
| 2 | Visibility | 2.9% | 1 |
| 3 | Identification Of The Vehicle | 2.9% | 1 |
Failures per 10,000 Miles
avg. 54,113 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Brakes | 1.09 | 5.9% | 2 |
| Visibility | 0.54 | 2.9% | 1 |
| Identification of the vehicle | 0.54 | 2.9% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1992 Bedford Rascal has an MOT pass rate of 35.3% based on 34 tests — significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 54,113 miles on the odometer. With a 64.7% failure rate, the 1992 Rascal is rated as "Very Poor" for MOT reliability.
If you own or are considering buying a 1992 Bedford Rascal, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to brakes: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm). At 54,113 average miles, these vehicles are in the mid-range where component wear starts to become a factor.
Brakes — 5.9% of failures
Brakes issues account for 5.9% of MOT failures on 1992 Bedford Rascal models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Visibility — 2.9% of failures
Visibility issues account for 2.9% of MOT failures on 1992 Bedford Rascal models. Visibility failures relate to the windscreen, wipers, washers, mirrors, and view-obstructing damage. Cracks in the windscreen swept area, ineffective wipers, or empty washer bottles are common causes. Typical repair costs: £10–300. Pre-MOT check: Check the windscreen for chips and cracks — damage larger than 10mm in the driver's swept area or 40mm elsewhere will fail. Test washers and wipers. Ensure both door mirrors are intact and adjustable.
Identification of the vehicle — 2.9% of failures
Identification of the vehicle issues account for 2.9% of MOT failures on 1992 Bedford Rascal models. Identification failures relate to the Vehicle Identification Number (VIN) and registration plate. The VIN must be permanently displayed and legible, and the registration plate must meet British Standard formatting. Typical repair costs: £10–50. Pre-MOT check: Ensure the VIN plate is visible and legible (usually in the windscreen or under the bonnet). Check that number plates are clean, undamaged, and use the correct font and spacing.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.