1960 Bedford Unclassified MOT Pass Rate
Pass rate for Unclassified models manufactured in 1960, based on 44 real MOT test results.
Data from official DVSA MOT testing records
1960 Bedford Unclassified MOT Analysis
The 1960 Bedford Unclassified has an MOT pass rate of 72.7% based on 44 tests — above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 36,618 miles on the odometer. With a 27.3% failure rate, the 1960 Unclassified is rated as "Very Good" for MOT reliability.
The leading cause of MOT failure for the 1960 Bedford Unclassified is Body, chassis, structure, responsible for 4.5% of failures. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs range from £100–500+.
Top failures specific to 1960 models only. The overall Unclassified page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Body, Chassis, Structure | 4.5% | 2 |
Failures per 10,000 Miles
avg. 36,618 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Body & Structure | 1.24 | 4.5% | 2 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1960 Bedford Unclassified has an MOT pass rate of 72.7% based on 44 tests — above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 36,618 miles on the odometer. With a 27.3% failure rate, the 1960 Unclassified is rated as "Very Good" for MOT reliability.
If you own or are considering buying a 1960 Bedford Unclassified, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to body, chassis, structure: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely. With relatively low average mileage of 36,618 miles, many of these vehicles are still in good mechanical condition.
Body, chassis, structure — 4.5% of failures
Body, chassis, structure issues account for 4.5% of MOT failures on 1960 Bedford Unclassified models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.