2010 Bentley Brooklands MOT Pass Rate
Pass rate for Brooklands models manufactured in 2010, based on 46 real MOT test results.
Data from official DVSA MOT testing records
2010 Bentley Brooklands MOT Analysis
The 2010 Bentley Brooklands has an MOT pass rate of 87.0% based on 46 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 17,923 miles on the odometer. With a 13.0% failure rate, the 2010 Brooklands is rated as "Excellent" for MOT reliability.
The leading cause of MOT failure for the 2010 Bentley Brooklands is Body, chassis, structure, responsible for 2.2% of failures. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs range from £100–500+.
Top failures specific to 2010 models only. The overall Brooklands page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Body, Chassis, Structure | 2.2% | 1 |
Failures per 10,000 Miles
avg. 17,923 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Body & Structure | 1.21 | 2.2% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2010 Bentley Brooklands has an MOT pass rate of 87.0% based on 46 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 17,923 miles on the odometer. With a 13.0% failure rate, the 2010 Brooklands is rated as "Excellent" for MOT reliability.
If you own or are considering buying a 2010 Bentley Brooklands, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to body, chassis, structure: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely. With relatively low average mileage of 17,923 miles, many of these vehicles are still in good mechanical condition.
Body, chassis, structure — 2.2% of failures
Body, chassis, structure issues account for 2.2% of MOT failures on 2010 Bentley Brooklands models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.