1965 Bentley S3 MOT Pass Rate
Pass rate for S3 models manufactured in 1965, based on 365 real MOT test results.
Data from official DVSA MOT testing records
This page shows all S3 cars tested in 1965. Want to see how cars built in 1965 hold up over time?
View 1965 Bentley S3 vintage page → (81.1% current pass rate)1965 Bentley S3 MOT Analysis
The 1965 Bentley S3 has an MOT pass rate of 85.8% based on 365 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 46,144 miles on the odometer. With a 14.2% failure rate, the 1965 S3 is rated as "Excellent" for MOT reliability.
The leading cause of MOT failure for the 1965 Bentley S3 is Tyres, responsible for 0.3% of failures. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs range from £50–200 per tyre. Visibility is the second most common issue at 0.3%.
Top failures specific to 1965 models only. The overall S3 page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Tyres | 0.3% | 1 |
| 2 | Visibility | 0.3% | 1 |
Failures per 10,000 Miles
avg. 46,144 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Tyres | 0.06 | 0.3% | 1 |
| Visibility | 0.06 | 0.3% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1965 Bentley S3 has an MOT pass rate of 85.8% based on 365 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 46,144 miles on the odometer. With a 14.2% failure rate, the 1965 S3 is rated as "Excellent" for MOT reliability.
If you own or are considering buying a 1965 Bentley S3, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to tyres: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating. With relatively low average mileage of 46,144 miles, many of these vehicles are still in good mechanical condition.
Tyres — 0.3% of failures
Tyres issues account for 0.3% of MOT failures on 1965 Bentley S3 models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: £50–200 per tyre. Pre-MOT check: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.
Visibility — 0.3% of failures
Visibility issues account for 0.3% of MOT failures on 1965 Bentley S3 models. Visibility failures relate to the windscreen, wipers, washers, mirrors, and view-obstructing damage. Cracks in the windscreen swept area, ineffective wipers, or empty washer bottles are common causes. Typical repair costs: £10–300. Pre-MOT check: Check the windscreen for chips and cracks — damage larger than 10mm in the driver's swept area or 40mm elsewhere will fail. Test washers and wipers. Ensure both door mirrors are intact and adjustable.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.