1978 Bentley T2 MOT Pass Rate
Pass rate for T2 models manufactured in 1978, based on 213 real MOT test results.
Data from official DVSA MOT testing records
1978 Bentley T2 MOT Analysis
The 1978 Bentley T2 has an MOT pass rate of 72.3% based on 213 tests — above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 105,823 miles on the odometer. With a 27.7% failure rate, the 1978 T2 is rated as "Very Good" for MOT reliability.
The leading cause of MOT failure for the 1978 Bentley T2 is Body, chassis, structure, responsible for 0.5% of failures. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs range from £100–500+. Visibility is the second most common issue at 0.5%.
Top failures specific to 1978 models only. The overall T2 page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Body, Chassis, Structure | 0.5% | 1 |
| 2 | Visibility | 0.5% | 1 |
Failures per 10,000 Miles
avg. 105,823 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Body & Structure | 0.04 | 0.5% | 1 |
| Visibility | 0.04 | 0.5% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1978 Bentley T2 has an MOT pass rate of 72.3% based on 213 tests — above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 105,823 miles on the odometer. With a 27.7% failure rate, the 1978 T2 is rated as "Very Good" for MOT reliability.
If you own or are considering buying a 1978 Bentley T2, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to body, chassis, structure: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely. With an average mileage of 105,823 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.
Body, chassis, structure — 0.5% of failures
Body, chassis, structure issues account for 0.5% of MOT failures on 1978 Bentley T2 models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Visibility — 0.5% of failures
Visibility issues account for 0.5% of MOT failures on 1978 Bentley T2 models. Visibility failures relate to the windscreen, wipers, washers, mirrors, and view-obstructing damage. Cracks in the windscreen swept area, ineffective wipers, or empty washer bottles are common causes. Typical repair costs: £10–300. Pre-MOT check: Check the windscreen for chips and cracks — damage larger than 10mm in the driver's swept area or 40mm elsewhere will fail. Test washers and wipers. Ensure both door mirrors are intact and adjustable.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.