2008 BMW 116i Es MOT Pass Rate
Pass rate for 116i Es models manufactured in 2008, based on 795 real MOT test results.
Data from official DVSA MOT testing records
This page shows all 116i Es cars tested in 2008. Want to see how cars built in 2008 hold up over time?
View 2008 BMW 116i Es vintage page → (61.3% current pass rate)2008 BMW 116i Es MOT Analysis
The 2008 BMW 116i Es has an MOT pass rate of 74.5% based on 795 tests — above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 52,105 miles on the odometer. With a 25.5% failure rate, the 2008 116i Es is rated as "Very Good" for MOT reliability.
The leading cause of MOT failure for the 2008 BMW 116i Es is Tyres, responsible for 5.7% of failures. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs range from £50–200 per tyre. Brakes is the second most common issue at 4.9%. Suspension follows at 3.0%.
Top failures specific to 2008 models only. The overall 116i Es page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Tyres | 5.7% | 45 |
| 2 | Brakes | 4.9% | 39 |
| 3 | Suspension | 3.0% | 24 |
| 4 | Lamps, Reflectors And Electrical Equipment | 2.9% | 23 |
| 5 | Driver's View Of The Road | 1.5% | 12 |
| 6 | Exhaust, Fuel And Emissions | 0.9% | 7 |
| 7 | Road Wheels | 0.8% | 6 |
| 8 | Registration Plates And Vin | 0.5% | 4 |
| 9 | Non-component Advisories | 0.4% | 3 |
| 10 | Seat Belts And Supplementary Restraint Systems | 0.3% | 2 |
| 11 | Steering | 0.3% | 2 |
Failures per 10,000 Miles
avg. 52,105 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Tyres | 1.09 | 5.7% | 45 |
| Brakes | 0.94 | 4.9% | 39 |
| Suspension | 0.58 | 3.0% | 24 |
| Lamps & Electrical | 0.56 | 2.9% | 23 |
| Visibility | 0.29 | 1.5% | 12 |
| Emissions & Exhaust | 0.17 | 0.9% | 7 |
| Wheels | 0.14 | 0.8% | 6 |
| Registration Plates and VIN | 0.10 | 0.5% | 4 |
| Non-component advisories | 0.07 | 0.4% | 3 |
| Seat Belts | 0.05 | 0.3% | 2 |
| Steering | 0.05 | 0.3% | 2 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2008 BMW 116i Es has an MOT pass rate of 74.5% based on 795 tests — above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 52,105 miles on the odometer. With a 25.5% failure rate, the 2008 116i Es is rated as "Very Good" for MOT reliability.
If you own or are considering buying a 2008 BMW 116i Es, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to tyres: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating. At 52,105 average miles, these vehicles are in the mid-range where component wear starts to become a factor.
Tyres — 5.7% of failures
Tyres issues account for 5.7% of MOT failures on 2008 BMW 116i Es models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: £50–200 per tyre. Pre-MOT check: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.
Brakes — 4.9% of failures
Brakes issues account for 4.9% of MOT failures on 2008 BMW 116i Es models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Suspension — 3.0% of failures
Suspension issues account for 3.0% of MOT failures on 2008 BMW 116i Es models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.