2009 BMW 1series MOT Pass Rate
Pass rate for 1series models manufactured in 2009, based on 34 real MOT test results.
Data from official DVSA MOT testing records
2009 BMW 1series MOT Analysis
The 2009 BMW 1series has an MOT pass rate of 85.3% based on 34 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 50,892 miles on the odometer. With a 14.7% failure rate, the 2009 1series is rated as "Excellent" for MOT reliability.
The leading cause of MOT failure for the 2009 BMW 1series is Identification of the vehicle, responsible for 2.9% of failures. Identification failures relate to the Vehicle Identification Number (VIN) and registration plate. The VIN must be permanently displayed and legible, and the registration plate must meet British Standard formatting. Typical repair costs range from £10–50. Suspension is the second most common issue at 2.9%.
Top failures specific to 2009 models only. The overall 1series page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Identification Of The Vehicle | 2.9% | 1 |
| 2 | Suspension | 2.9% | 1 |
Failures per 10,000 Miles
avg. 50,892 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Identification of the vehicle | 0.58 | 2.9% | 1 |
| Suspension | 0.58 | 2.9% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2009 BMW 1series has an MOT pass rate of 85.3% based on 34 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 50,892 miles on the odometer. With a 14.7% failure rate, the 2009 1series is rated as "Excellent" for MOT reliability.
If you own or are considering buying a 2009 BMW 1series, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to identification of the vehicle: Ensure the VIN plate is visible and legible (usually in the windscreen or under the bonnet). Check that number plates are clean, undamaged, and use the correct font and spacing. At 50,892 average miles, these vehicles are in the mid-range where component wear starts to become a factor.
Identification of the vehicle — 2.9% of failures
Identification of the vehicle issues account for 2.9% of MOT failures on 2009 BMW 1series models. Identification failures relate to the Vehicle Identification Number (VIN) and registration plate. The VIN must be permanently displayed and legible, and the registration plate must meet British Standard formatting. Typical repair costs: £10–50. Pre-MOT check: Ensure the VIN plate is visible and legible (usually in the windscreen or under the bonnet). Check that number plates are clean, undamaged, and use the correct font and spacing.
Suspension — 2.9% of failures
Suspension issues account for 2.9% of MOT failures on 2009 BMW 1series models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.