2011 BMW 3 MOT Pass Rate
Pass rate for 3 models manufactured in 2011, based on 104 real MOT test results.
Data from official DVSA MOT testing records
2011 BMW 3 MOT Analysis
The 2011 BMW 3 has an MOT pass rate of 75.0% based on 104 tests — above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 74,854 miles on the odometer. With a 25.0% failure rate, the 2011 3 is rated as "Very Good" for MOT reliability.
The leading cause of MOT failure for the 2011 BMW 3 is Tyres, responsible for 1.9% of failures. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs range from £50–200 per tyre. Body, chassis, structure is the second most common issue at 1.0%.
Top failures specific to 2011 models only. The overall 3 page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Tyres | 1.9% | 2 |
| 2 | Body, Chassis, Structure | 1.0% | 1 |
Failures per 10,000 Miles
avg. 74,854 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Tyres | 0.26 | 1.9% | 2 |
| Body & Structure | 0.13 | 1.0% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2011 BMW 3 has an MOT pass rate of 75.0% based on 104 tests — above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 74,854 miles on the odometer. With a 25.0% failure rate, the 2011 3 is rated as "Very Good" for MOT reliability.
If you own or are considering buying a 2011 BMW 3, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to tyres: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating. At 74,854 average miles, these vehicles are in the mid-range where component wear starts to become a factor.
Tyres — 1.9% of failures
Tyres issues account for 1.9% of MOT failures on 2011 BMW 3 models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: £50–200 per tyre. Pre-MOT check: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.
Body, chassis, structure — 1.0% of failures
Body, chassis, structure issues account for 1.0% of MOT failures on 2011 BMW 3 models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.