Skip to main content
Pass Your MOT

1995 BMW 316 I Se Auto MOT Pass Rate

Pass rate for 316 I Se Auto models manufactured in 1995, based on 107 real MOT test results.

42.1%
Pass Rate
57.9%
Fail Rate
107
Total Tests
115,387
Avg Mileage

Data from official DVSA MOT testing records

This page shows all 316 I Se Auto cars tested in 1995. Want to see how cars built in 1995 hold up over time?

View 1995 BMW 316 I Se Auto vintage page → (41.9% current pass rate)

1995 BMW 316 I Se Auto MOT Analysis

The 1995 BMW 316 I Se Auto has an MOT pass rate of 42.1% based on 107 tests — significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 115,387 miles on the odometer. With a 57.9% failure rate, the 1995 316 I Se Auto is rated as "Very Poor" for MOT reliability.

The leading cause of MOT failure for the 1995 BMW 316 I Se Auto is Lamps, Reflectors and Electrical Equipment, responsible for 0.9% of failures. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs range from £5–50. Suspension is the second most common issue at 0.9%.

Top failures specific to 1995 models only. The overall 316 I Se Auto page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Lamps, Reflectors And Electrical Equipment0.9%1
2Suspension0.9%1

Failures per 10,000 Miles

avg. 115,387 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Lamps & Electrical0.08% per 10K miSuspension0.08% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Lamps & Electrical0.080.9%1
Suspension0.080.9%1

Mileage Statistics

115,387
Mean
116,557
Median
97,353
25th Percentile
123,839
75th Percentile
5.02% failures per 10K miles

Mileage-adjusted failure rate — accounts for how much this model year is typically driven.

About This Data

The 1995 BMW 316 I Se Auto has an MOT pass rate of 42.1% based on 107 tests — significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 115,387 miles on the odometer. With a 57.9% failure rate, the 1995 316 I Se Auto is rated as "Very Poor" for MOT reliability.

If you own or are considering buying a 1995 BMW 316 I Se Auto, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to lamps, reflectors and electrical equipment: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test. With an average mileage of 115,387 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.

Lamps, Reflectors and Electrical Equipment — 0.9% of failures

Lamps, Reflectors and Electrical Equipment issues account for 0.9% of MOT failures on 1995 BMW 316 I Se Auto models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Suspension — 0.9% of failures

Suspension issues account for 0.9% of MOT failures on 1995 BMW 316 I Se Auto models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.

Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue