2000 BMW 316 I Se Auto MOT Pass Rate
Pass rate for 316 I Se Auto models manufactured in 2000, based on 78 real MOT test results.
Data from official DVSA MOT testing records
2000 BMW 316 I Se Auto MOT Analysis
The 2000 BMW 316 I Se Auto has an MOT pass rate of 59.0% based on 78 tests — slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 100,877 miles on the odometer. With a 41.0% failure rate, the 2000 316 I Se Auto is rated as "Below Average" for MOT reliability.
The leading cause of MOT failure for the 2000 BMW 316 I Se Auto is Suspension, responsible for 2.6% of failures. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs range from £200–500. Exhaust, Fuel and Emissions is the second most common issue at 1.3%.
Top failures specific to 2000 models only. The overall 316 I Se Auto page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Suspension | 2.6% | 2 |
| 2 | Exhaust, Fuel And Emissions | 1.3% | 1 |
Failures per 10,000 Miles
avg. 100,877 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Suspension | 0.25 | 2.6% | 2 |
| Emissions & Exhaust | 0.13 | 1.3% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2000 BMW 316 I Se Auto has an MOT pass rate of 59.0% based on 78 tests — slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 100,877 miles on the odometer. With a 41.0% failure rate, the 2000 316 I Se Auto is rated as "Below Average" for MOT reliability.
If you own or are considering buying a 2000 BMW 316 I Se Auto, budget for potential repairs before each MOT. Before your MOT, pay particular attention to suspension: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks. With an average mileage of 100,877 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.
Suspension — 2.6% of failures
Suspension issues account for 2.6% of MOT failures on 2000 BMW 316 I Se Auto models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Exhaust, Fuel and Emissions — 1.3% of failures
Exhaust, Fuel and Emissions issues account for 1.3% of MOT failures on 2000 BMW 316 I Se Auto models. Emissions failures occur when exhaust gases exceed legal limits for carbon monoxide (CO), hydrocarbons (HC), or particulate matter (diesel). Common causes include faulty oxygen sensors, clogged catalytic converters, or DPF issues on diesel vehicles. Typical repair costs: £100–1,000+. Pre-MOT check: If the engine management light is on, get it diagnosed before the MOT. For diesel cars, ensure the DPF has completed a regeneration cycle. Regular servicing and using premium fuel before the test can help.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.