2005 BMW 320i Se Auto MOT Pass Rate
Pass rate for 320i Se Auto models manufactured in 2005, based on 1,146 real MOT test results.
Data from official DVSA MOT testing records
This page shows all 320i Se Auto cars tested in 2005. Want to see how cars built in 2005 hold up over time?
View 2005 BMW 320i Se Auto vintage page → (72.5% current pass rate)2005 BMW 320i Se Auto MOT Analysis
The 2005 BMW 320i Se Auto has an MOT pass rate of 79.3% based on 1,146 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 63,254 miles on the odometer. With a 20.7% failure rate, the 2005 320i Se Auto is rated as "Excellent" for MOT reliability.
The leading cause of MOT failure for the 2005 BMW 320i Se Auto is Brakes, responsible for 2.7% of failures. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs range from £150–400. Suspension is the second most common issue at 1.5%. Non-component advisories follows at 1.3%.
Top failures specific to 2005 models only. The overall 320i Se Auto page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Brakes | 2.7% | 31 |
| 2 | Suspension | 1.5% | 17 |
| 3 | Non-component Advisories | 1.3% | 15 |
| 4 | Tyres | 1.3% | 15 |
| 5 | Lamps, Reflectors And Electrical Equipment | 1.1% | 13 |
| 6 | Driver's View Of The Road | 0.5% | 6 |
| 7 | Exhaust, Fuel And Emissions | 0.5% | 6 |
| 8 | Seat Belts And Supplementary Restraint Systems | 0.3% | 3 |
| 9 | Registration Plates And Vin | 0.2% | 2 |
| 10 | Road Wheels | 0.1% | 1 |
| 11 | Steering | 0.1% | 1 |
Failures per 10,000 Miles
avg. 63,254 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Brakes | 0.43 | 2.7% | 31 |
| Suspension | 0.23 | 1.5% | 17 |
| Non-component advisories | 0.21 | 1.3% | 15 |
| Tyres | 0.21 | 1.3% | 15 |
| Lamps & Electrical | 0.18 | 1.1% | 13 |
| Visibility | 0.08 | 0.5% | 6 |
| Emissions & Exhaust | 0.08 | 0.5% | 6 |
| Seat Belts | 0.04 | 0.3% | 3 |
| Registration Plates and VIN | 0.03 | 0.2% | 2 |
| Wheels | 0.01 | 0.1% | 1 |
| Steering | 0.01 | 0.1% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2005 BMW 320i Se Auto has an MOT pass rate of 79.3% based on 1,146 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 63,254 miles on the odometer. With a 20.7% failure rate, the 2005 320i Se Auto is rated as "Excellent" for MOT reliability.
If you own or are considering buying a 2005 BMW 320i Se Auto, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to brakes: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm). At 63,254 average miles, these vehicles are in the mid-range where component wear starts to become a factor.
Brakes — 2.7% of failures
Brakes issues account for 2.7% of MOT failures on 2005 BMW 320i Se Auto models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Suspension — 1.5% of failures
Suspension issues account for 1.5% of MOT failures on 2005 BMW 320i Se Auto models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Non-component advisories — 1.3% of failures
Non-component advisories issues account for 1.3% of MOT failures on 2005 BMW 320i Se Auto models. Non-component advisories issues are a common cause of MOT failure. Regular inspection and maintenance of these components helps ensure your vehicle passes its MOT. Typical repair costs: £100–400. Pre-MOT check: Have this system checked during regular servicing. Look for warning signs like unusual noises, vibrations, or dashboard warning lights.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.