Skip to main content
Pass Your MOT

2020 BMW 330e Se Pro Auto MOT Pass Rate

Pass rate for 330e Se Pro Auto models manufactured in 2020, based on 2,849 real MOT test results.

85.7%
Pass Rate
14.3%
Fail Rate
2,849
Total Tests
47,352
Avg Mileage

Data from official DVSA MOT testing records

This page shows all 330e Se Pro Auto cars tested in 2020. Want to see how cars built in 2020 hold up over time?

View 2020 BMW 330e Se Pro Auto vintage page → (88.6% current pass rate)

2020 BMW 330e Se Pro Auto MOT Analysis

The 2020 BMW 330e Se Pro Auto has an MOT pass rate of 85.7% based on 2,849 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 47,352 miles on the odometer. With a 14.3% failure rate, the 2020 330e Se Pro Auto is rated as "Excellent" for MOT reliability.

The leading cause of MOT failure for the 2020 BMW 330e Se Pro Auto is Tyres, responsible for 8.0% of failures. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs range from £50–200 per tyre. Lamps, reflectors and electrical equipment is the second most common issue at 1.2%. Suspension follows at 1.2%.

Top failures specific to 2020 models only. The overall 330e Se Pro Auto page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Tyres8.0%227
2Lamps, Reflectors And Electrical Equipment1.2%33
3Suspension1.2%33
4Visibility1.1%32
5Non-component Advisories0.4%11
6Brakes0.4%10
7Noise, Emissions And Leaks0.2%6
8Seat Belts And Supplementary Restraint Systems0.2%6
9Road Wheels0.1%4
10Identification Of The Vehicle0.1%3

Failures per 10,000 Miles

avg. 47,352 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Tyres1.68% per 10K miLamps & Electrical0.24% per 10K miSuspension0.24% per 10K miVisibility0.24% per 10K miNon-component advisories0.08% per 10K miBrakes0.07% per 10K miNoise, emissions and leaks0.04% per 10K miSeat Belts0.04% per 10K miWheels0.03% per 10K miIdentification of the vehicle0.02% per 10K miSteering0.01% per 10K miBody & Structure0.01% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Tyres1.688.0%227
Lamps & Electrical0.241.2%33
Suspension0.241.2%33
Visibility0.241.1%32
Non-component advisories0.080.4%11
Brakes0.070.4%10
Noise, emissions and leaks0.040.2%6
Seat Belts0.040.2%6
Wheels0.030.1%4
Identification of the vehicle0.020.1%3
Steering0.010.0%1
Body & Structure0.010.0%1

Mileage Statistics

47,352
Mean
37,452
Median
19,734
25th Percentile
45,120
75th Percentile
3.02% failures per 10K miles

Mileage-adjusted failure rate — accounts for how much this model year is typically driven.

About This Data

The 2020 BMW 330e Se Pro Auto has an MOT pass rate of 85.7% based on 2,849 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 47,352 miles on the odometer. With a 14.3% failure rate, the 2020 330e Se Pro Auto is rated as "Excellent" for MOT reliability.

If you own or are considering buying a 2020 BMW 330e Se Pro Auto, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to tyres: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating. With relatively low average mileage of 47,352 miles, many of these vehicles are still in good mechanical condition.

Tyres — 8.0% of failures

Tyres issues account for 8.0% of MOT failures on 2020 BMW 330e Se Pro Auto models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: £50–200 per tyre. Pre-MOT check: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.

Lamps, reflectors and electrical equipment — 1.2% of failures

Lamps, reflectors and electrical equipment issues account for 1.2% of MOT failures on 2020 BMW 330e Se Pro Auto models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Suspension — 1.2% of failures

Suspension issues account for 1.2% of MOT failures on 2020 BMW 330e Se Pro Auto models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.

Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue