2013 BMW 428 MOT Pass Rate
Pass rate for 428 models manufactured in 2013, based on 1,127 real MOT test results.
Data from official DVSA MOT testing records
This page shows all 428 cars tested in 2013. Want to see how cars built in 2013 hold up over time?
View 2013 BMW 428 vintage page → (82.5% current pass rate)2013 BMW 428 MOT Analysis
The 2013 BMW 428 has an MOT pass rate of 84.7% based on 1,127 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 53,833 miles on the odometer. With a 15.3% failure rate, the 2013 428 is rated as "Excellent" for MOT reliability.
The leading cause of MOT failure for the 2013 BMW 428 is Tyres, responsible for 1.6% of failures. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs range from £50–200 per tyre. Lamps, reflectors and electrical equipment is the second most common issue at 1.2%. Suspension follows at 0.8%.
Top failures specific to 2013 models only. The overall 428 page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Tyres | 1.6% | 18 |
| 2 | Lamps, Reflectors And Electrical Equipment | 1.2% | 13 |
| 3 | Suspension | 0.8% | 9 |
| 4 | Non-component Advisories | 0.5% | 6 |
| 5 | Visibility | 0.4% | 5 |
| 6 | Noise, Emissions And Leaks | 0.4% | 5 |
| 7 | Brakes | 0.4% | 5 |
| 8 | Body, Chassis, Structure | 0.4% | 4 |
| 9 | Identification Of The Vehicle | 0.2% | 2 |
| 10 | Steering | 0.2% | 2 |
Failures per 10,000 Miles
avg. 53,833 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Tyres | 0.30 | 1.6% | 18 |
| Lamps & Electrical | 0.21 | 1.2% | 13 |
| Suspension | 0.15 | 0.8% | 9 |
| Non-component advisories | 0.10 | 0.5% | 6 |
| Visibility | 0.08 | 0.4% | 5 |
| Noise, emissions and leaks | 0.08 | 0.4% | 5 |
| Brakes | 0.08 | 0.4% | 5 |
| Body & Structure | 0.07 | 0.4% | 4 |
| Identification of the vehicle | 0.03 | 0.2% | 2 |
| Steering | 0.03 | 0.2% | 2 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2013 BMW 428 has an MOT pass rate of 84.7% based on 1,127 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 53,833 miles on the odometer. With a 15.3% failure rate, the 2013 428 is rated as "Excellent" for MOT reliability.
If you own or are considering buying a 2013 BMW 428, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to tyres: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating. At 53,833 average miles, these vehicles are in the mid-range where component wear starts to become a factor.
Tyres — 1.6% of failures
Tyres issues account for 1.6% of MOT failures on 2013 BMW 428 models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: £50–200 per tyre. Pre-MOT check: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.
Lamps, reflectors and electrical equipment — 1.2% of failures
Lamps, reflectors and electrical equipment issues account for 1.2% of MOT failures on 2013 BMW 428 models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.
Suspension — 0.8% of failures
Suspension issues account for 0.8% of MOT failures on 2013 BMW 428 models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.