2000 BMW C1 MOT Pass Rate
Pass rate for C1 models manufactured in 2000, based on 735 real MOT test results.
Data from official DVSA MOT testing records
This page shows all C1 cars tested in 2000. Want to see how cars built in 2000 hold up over time?
View 2000 BMW C1 vintage page → (78.3% current pass rate)2000 BMW C1 MOT Analysis
The 2000 BMW C1 has an MOT pass rate of 75.0% based on 735 tests — above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 19,305 miles on the odometer. With a 25.0% failure rate, the 2000 C1 is rated as "Very Good" for MOT reliability.
The leading cause of MOT failure for the 2000 BMW C1 is Motorcycle suspension, responsible for 0.4% of failures. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs range from £200–500. Motorcycle tyres is the second most common issue at 0.1%. Identification of the vehicle follows at 0.1%.
Top failures specific to 2000 models only. The overall C1 page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Motorcycle Suspension | 0.4% | 3 |
| 2 | Motorcycle Tyres | 0.1% | 1 |
| 3 | Identification Of The Vehicle | 0.1% | 1 |
| 4 | Motorcycle Brakes | 0.1% | 1 |
| 5 | Motorcycle Lamps And Reflectors | 0.1% | 1 |
Failures per 10,000 Miles
avg. 19,305 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Motorcycle suspension | 0.21 | 0.4% | 3 |
| Motorcycle tyres | 0.07 | 0.1% | 1 |
| Identification of the vehicle | 0.07 | 0.1% | 1 |
| Motorcycle brakes | 0.07 | 0.1% | 1 |
| Motorcycle lamps and reflectors | 0.07 | 0.1% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2000 BMW C1 has an MOT pass rate of 75.0% based on 735 tests — above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 19,305 miles on the odometer. With a 25.0% failure rate, the 2000 C1 is rated as "Very Good" for MOT reliability.
If you own or are considering buying a 2000 BMW C1, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to motorcycle suspension: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks. With relatively low average mileage of 19,305 miles, many of these vehicles are still in good mechanical condition.
Motorcycle suspension — 0.4% of failures
Motorcycle suspension issues account for 0.4% of MOT failures on 2000 BMW C1 models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Motorcycle tyres — 0.1% of failures
Motorcycle tyres issues account for 0.1% of MOT failures on 2000 BMW C1 models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: £50–200 per tyre. Pre-MOT check: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.
Identification of the vehicle — 0.1% of failures
Identification of the vehicle issues account for 0.1% of MOT failures on 2000 BMW C1 models. Identification failures relate to the Vehicle Identification Number (VIN) and registration plate. The VIN must be permanently displayed and legible, and the registration plate must meet British Standard formatting. Typical repair costs: £10–50. Pre-MOT check: Ensure the VIN plate is visible and legible (usually in the windscreen or under the bonnet). Check that number plates are clean, undamaged, and use the correct font and spacing.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.