1992 BMW Z1 MOT Pass Rate
Pass rate for Z1 models manufactured in 1992, based on 116 real MOT test results.
Data from official DVSA MOT testing records
1992 BMW Z1 MOT Analysis
The 1992 BMW Z1 has an MOT pass rate of 87.9% based on 116 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 47,004 miles on the odometer. With a 12.1% failure rate, the 1992 Z1 is rated as "Excellent" for MOT reliability.
The leading cause of MOT failure for the 1992 BMW Z1 is Body, chassis, structure, responsible for 0.9% of failures. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs range from £100–500+. Lamps, reflectors and electrical equipment is the second most common issue at 0.9%.
Top failures specific to 1992 models only. The overall Z1 page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Body, Chassis, Structure | 0.9% | 1 |
| 2 | Lamps, Reflectors And Electrical Equipment | 0.9% | 1 |
Failures per 10,000 Miles
avg. 47,004 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Body & Structure | 0.18 | 0.9% | 1 |
| Lamps & Electrical | 0.18 | 0.9% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1992 BMW Z1 has an MOT pass rate of 87.9% based on 116 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 47,004 miles on the odometer. With a 12.1% failure rate, the 1992 Z1 is rated as "Excellent" for MOT reliability.
If you own or are considering buying a 1992 BMW Z1, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to body, chassis, structure: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely. With relatively low average mileage of 47,004 miles, many of these vehicles are still in good mechanical condition.
Body, chassis, structure — 0.9% of failures
Body, chassis, structure issues account for 0.9% of MOT failures on 1992 BMW Z1 models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Lamps, reflectors and electrical equipment — 0.9% of failures
Lamps, reflectors and electrical equipment issues account for 0.9% of MOT failures on 1992 BMW Z1 models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.