Skip to main content
Pass Your MOT

2012 Chevrolet Captiva MOT Pass Rate

Pass rate for Captiva models manufactured in 2012, based on 10,274 real MOT test results.

63.5%
Pass Rate
36.5%
Fail Rate
10,274
Total Tests
69,604
Avg Mileage

Data from official DVSA MOT testing records

This page shows all Captiva cars tested in 2012. Want to see how cars built in 2012 hold up over time?

View 2012 Chevrolet Captiva vintage page โ†’ (62.2% current pass rate)

2012 Chevrolet Captiva MOT Analysis

The 2012 Chevrolet Captiva has an MOT pass rate of 63.5% based on 10,274 tests โ€” around the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 69,604 miles on the odometer. With a 36.5% failure rate, the 2012 Captiva is rated as "Average" for MOT reliability.

The leading cause of MOT failure for the 2012 Chevrolet Captiva is Brakes, responsible for 5.3% of failures. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ€” any brake deficiency will result in an MOT fail. Typical repair costs range from ยฃ150โ€“400. Suspension is the second most common issue at 4.7%. Lamps, reflectors and electrical equipment follows at 4.6%.

Top failures specific to 2012 models only. The overall Captiva page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Brakes5.3%542
2Suspension4.7%486
3Lamps, Reflectors And Electrical Equipment4.6%475
4Tyres3.4%346
5Noise, Emissions And Leaks2.2%224
6Visibility1.0%104
7Body, Chassis, Structure0.8%79
8Steering0.5%48
9Non-component Advisories0.5%48
10Seat Belts And Supplementary Restraint Systems0.4%40
11Identification Of The Vehicle0.3%31

Failures per 10,000 Miles

avg. 69,604 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Brakes0.76% per 10K miSuspension0.68% per 10K miLamps & Electrical0.66% per 10K miTyres0.48% per 10K miNoise, emissions and leaks0.31% per 10K miVisibility0.15% per 10K miBody & Structure0.11% per 10K miSteering0.07% per 10K miNon-component advisories0.07% per 10K miSeat Belts0.06% per 10K miIdentification of the vehicle0.04% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Brakes0.765.3%542
Suspension0.684.7%486
Lamps & Electrical0.664.6%475
Tyres0.483.4%346
Noise, emissions and leaks0.312.2%224
Visibility0.151.0%104
Body & Structure0.110.8%79
Steering0.070.5%48
Non-component advisories0.070.5%48
Seat Belts0.060.4%40
Identification of the vehicle0.040.3%31

Mileage Statistics

69,604
Mean
40,875
Median
34,763
25th Percentile
49,360
75th Percentile
5.24% failures per 10K miles

Mileage-adjusted failure rate โ€” accounts for how much this model year is typically driven.

About This Data

The 2012 Chevrolet Captiva has an MOT pass rate of 63.5% based on 10,274 tests โ€” around the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 69,604 miles on the odometer. With a 36.5% failure rate, the 2012 Captiva is rated as "Average" for MOT reliability.

If you own or are considering buying a 2012 Chevrolet Captiva, budget for potential repairs before each MOT. Before your MOT, pay particular attention to brakes: Listen for squealing or grinding noises. Check brake pedal feel โ€” if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm). At 69,604 average miles, these vehicles are in the mid-range where component wear starts to become a factor.

Brakes โ€” 5.3% of failures

Brakes issues account for 5.3% of MOT failures on 2012 Chevrolet Captiva models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ€” any brake deficiency will result in an MOT fail. Typical repair costs: ยฃ150โ€“400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel โ€” if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Suspension โ€” 4.7% of failures

Suspension issues account for 4.7% of MOT failures on 2012 Chevrolet Captiva models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: ยฃ200โ€“500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.

Lamps, reflectors and electrical equipment โ€” 4.6% of failures

Lamps, reflectors and electrical equipment issues account for 4.6% of MOT failures on 2012 Chevrolet Captiva models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: ยฃ5โ€“50. Pre-MOT check: Walk around the car and check every light โ€” headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Based on DVSA anonymised MOT test data (2005โ€“2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue