2008 Chrysler Sebring Limited 160 MOT Pass Rate
Pass rate for Sebring Limited 160 models manufactured in 2008, based on 2,131 real MOT test results.
Data from official DVSA MOT testing records
This page shows all Sebring Limited 160 cars tested in 2008. Want to see how cars built in 2008 hold up over time?
View 2008 Chrysler Sebring Limited 160 vintage page → (60.0% current pass rate)2008 Chrysler Sebring Limited 160 MOT Analysis
The 2008 Chrysler Sebring Limited 160 has an MOT pass rate of 65.5% based on 2,131 tests — slightly above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 66,073 miles on the odometer. With a 34.5% failure rate, the 2008 Sebring Limited 160 is rated as "Good" for MOT reliability.
The leading cause of MOT failure for the 2008 Chrysler Sebring Limited 160 is Lamps, Reflectors and Electrical Equipment, responsible for 4.6% of failures. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs range from £5–50. Brakes is the second most common issue at 4.1%. Suspension follows at 3.2%.
Top failures specific to 2008 models only. The overall Sebring Limited 160 page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Lamps, Reflectors And Electrical Equipment | 4.6% | 99 |
| 2 | Brakes | 4.1% | 87 |
| 3 | Suspension | 3.2% | 69 |
| 4 | Tyres | 2.6% | 55 |
| 5 | Steering | 1.5% | 32 |
| 6 | Driver's View Of The Road | 1.2% | 26 |
| 7 | Non-component Advisories | 1.2% | 25 |
| 8 | Registration Plates And Vin | 0.5% | 10 |
| 9 | Exhaust, Fuel And Emissions | 0.3% | 7 |
| 10 | Body, Structure And General Items | 0.2% | 4 |
| 11 | Seat Belts And Supplementary Restraint Systems | 0.2% | 4 |
| 12 | Road Wheels | 0.1% | 2 |
Failures per 10,000 Miles
avg. 66,073 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Lamps & Electrical | 0.70 | 4.6% | 99 |
| Brakes | 0.62 | 4.1% | 87 |
| Suspension | 0.49 | 3.2% | 69 |
| Tyres | 0.39 | 2.6% | 55 |
| Steering | 0.23 | 1.5% | 32 |
| Visibility | 0.18 | 1.2% | 26 |
| Non-component advisories | 0.18 | 1.2% | 25 |
| Registration Plates and VIN | 0.07 | 0.5% | 10 |
| Emissions & Exhaust | 0.05 | 0.3% | 7 |
| Body & Structure | 0.03 | 0.2% | 4 |
| Seat Belts | 0.03 | 0.2% | 4 |
| Wheels | 0.01 | 0.1% | 2 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2008 Chrysler Sebring Limited 160 has an MOT pass rate of 65.5% based on 2,131 tests — slightly above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 66,073 miles on the odometer. With a 34.5% failure rate, the 2008 Sebring Limited 160 is rated as "Good" for MOT reliability.
If you own or are considering buying a 2008 Chrysler Sebring Limited 160, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to lamps, reflectors and electrical equipment: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test. At 66,073 average miles, these vehicles are in the mid-range where component wear starts to become a factor.
Lamps, Reflectors and Electrical Equipment — 4.6% of failures
Lamps, Reflectors and Electrical Equipment issues account for 4.6% of MOT failures on 2008 Chrysler Sebring Limited 160 models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.
Brakes — 4.1% of failures
Brakes issues account for 4.1% of MOT failures on 2008 Chrysler Sebring Limited 160 models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Suspension — 3.2% of failures
Suspension issues account for 3.2% of MOT failures on 2008 Chrysler Sebring Limited 160 models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.