2010 Chrysler Sebring MOT Pass Rate
Pass rate for Sebring models manufactured in 2010, based on 46 real MOT test results.
Data from official DVSA MOT testing records
2010 Chrysler Sebring MOT Analysis
The 2010 Chrysler Sebring has an MOT pass rate of 65.2% based on 46 tests — slightly above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 51,800 miles on the odometer. With a 34.8% failure rate, the 2010 Sebring is rated as "Good" for MOT reliability.
The leading cause of MOT failure for the 2010 Chrysler Sebring is Tyres, responsible for 8.7% of failures. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs range from £50–200 per tyre.
Top failures specific to 2010 models only. The overall Sebring page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Tyres | 8.7% | 4 |
Failures per 10,000 Miles
avg. 51,800 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Tyres | 1.68 | 8.7% | 4 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2010 Chrysler Sebring has an MOT pass rate of 65.2% based on 46 tests — slightly above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 51,800 miles on the odometer. With a 34.8% failure rate, the 2010 Sebring is rated as "Good" for MOT reliability.
If you own or are considering buying a 2010 Chrysler Sebring, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to tyres: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating. At 51,800 average miles, these vehicles are in the mid-range where component wear starts to become a factor.
Tyres — 8.7% of failures
Tyres issues account for 8.7% of MOT failures on 2010 Chrysler Sebring models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: £50–200 per tyre. Pre-MOT check: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.