1999 Daewoo Lanos MOT Pass Rate
Pass rate for Lanos models manufactured in 1999, based on 25,968 real MOT test results.
Data from official DVSA MOT testing records
This page shows all Lanos cars tested in 1999. Want to see how cars built in 1999 hold up over time?
View 1999 Daewoo Lanos vintage page โ (73.9% current pass rate)1999 Daewoo Lanos MOT Analysis
The 1999 Daewoo Lanos has an MOT pass rate of 46.8% based on 25,968 tests โ significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 68,180 miles on the odometer. With a 53.2% failure rate, the 1999 Lanos is rated as "Very Poor" for MOT reliability.
The leading cause of MOT failure for the 1999 Daewoo Lanos is Brakes, responsible for 0.1% of failures. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ any brake deficiency will result in an MOT fail. Typical repair costs range from ยฃ150โ400. Noise, emissions and leaks is the second most common issue at 0.1%. Body, chassis, structure follows at 0.0%.
Top failures specific to 1999 models only. The overall Lanos page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Brakes | 0.1% | 22 |
| 2 | Noise, Emissions And Leaks | 0.1% | 20 |
Failures per 10,000 Miles
avg. 68,180 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Brakes | 0.01 | 0.1% | 22 |
| Noise, emissions and leaks | 0.01 | 0.1% | 20 |
Mileage Statistics
Mileage-adjusted failure rate โ accounts for how much this model year is typically driven.
About This Data
The 1999 Daewoo Lanos has an MOT pass rate of 46.8% based on 25,968 tests โ significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 68,180 miles on the odometer. With a 53.2% failure rate, the 1999 Lanos is rated as "Very Poor" for MOT reliability.
If you own or are considering buying a 1999 Daewoo Lanos, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to brakes: Listen for squealing or grinding noises. Check brake pedal feel โ if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm). At 68,180 average miles, these vehicles are in the mid-range where component wear starts to become a factor.
Brakes โ 0.1% of failures
Brakes issues account for 0.1% of MOT failures on 1999 Daewoo Lanos models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ any brake deficiency will result in an MOT fail. Typical repair costs: ยฃ150โ400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel โ if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Noise, emissions and leaks โ 0.1% of failures
Noise, emissions and leaks issues account for 0.1% of MOT failures on 1999 Daewoo Lanos models. Emissions failures occur when exhaust gases exceed legal limits for carbon monoxide (CO), hydrocarbons (HC), or particulate matter (diesel). Common causes include faulty oxygen sensors, clogged catalytic converters, or DPF issues on diesel vehicles. Typical repair costs: ยฃ100โ1,000+. Pre-MOT check: If the engine management light is on, get it diagnosed before the MOT. For diesel cars, ensure the DPF has completed a regeneration cycle. Regular servicing and using premium fuel before the test can help.
Body, chassis, structure โ 0.0% of failures
Body, chassis, structure issues account for 0.0% of MOT failures on 1999 Daewoo Lanos models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: ยฃ100โ500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Based on DVSA anonymised MOT test data (2005โ2024). Crown copyright, Open Government Licence v3.0.