Skip to main content
Pass Your MOT

1965 Daimler Unclassified MOT Pass Rate

Pass rate for Unclassified models manufactured in 1965, based on 89 real MOT test results.

77.5%
Pass Rate
22.5%
Fail Rate
89
Total Tests
66,381
Avg Mileage

Data from official DVSA MOT testing records

1965 Daimler Unclassified MOT Analysis

The 1965 Daimler Unclassified has an MOT pass rate of 77.5% based on 89 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 66,381 miles on the odometer. With a 22.5% failure rate, the 1965 Unclassified is rated as "Excellent" for MOT reliability.

The leading cause of MOT failure for the 1965 Daimler Unclassified is Body, chassis, structure, responsible for 5.6% of failures. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs range from £100–500+. Tyres is the second most common issue at 4.5%. Steering follows at 3.4%.

⚠ Based on limited data (89 tests)

Top failures specific to 1965 models only. The overall Unclassified page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Body, Chassis, Structure5.6%5
2Tyres4.5%4
3Steering3.4%3
4Suspension3.4%3
5Lamps, Reflectors And Electrical Equipment2.2%2
6Noise, Emissions And Leaks1.1%1
7Seat Belts And Supplementary Restraint Systems1.1%1
8Visibility1.1%1

Failures per 10,000 Miles

avg. 66,381 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Body & Structure0.85% per 10K miTyres0.68% per 10K miSteering0.51% per 10K miSuspension0.51% per 10K miLamps & Electrical0.34% per 10K miNoise, emissions and leaks0.17% per 10K miSeat Belts0.17% per 10K miVisibility0.17% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Body & Structure0.855.6%5
Tyres0.684.5%4
Steering0.513.4%3
Suspension0.513.4%3
Lamps & Electrical0.342.2%2
Noise, emissions and leaks0.171.1%1
Seat Belts0.171.1%1
Visibility0.171.1%1

Mileage Statistics

66,381
Mean
87,095
Median
41,055
25th Percentile
90,510
75th Percentile
3.39% failures per 10K miles

Mileage-adjusted failure rate — accounts for how much this model year is typically driven.

About This Data

The 1965 Daimler Unclassified has an MOT pass rate of 77.5% based on 89 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 66,381 miles on the odometer. With a 22.5% failure rate, the 1965 Unclassified is rated as "Excellent" for MOT reliability.

If you own or are considering buying a 1965 Daimler Unclassified, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to body, chassis, structure: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely. At 66,381 average miles, these vehicles are in the mid-range where component wear starts to become a factor.

Body, chassis, structure — 5.6% of failures

Body, chassis, structure issues account for 5.6% of MOT failures on 1965 Daimler Unclassified models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.

Tyres — 4.5% of failures

Tyres issues account for 4.5% of MOT failures on 1965 Daimler Unclassified models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: £50–200 per tyre. Pre-MOT check: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.

Steering — 3.4% of failures

Steering issues account for 3.4% of MOT failures on 1965 Daimler Unclassified models. Steering failures include excessive play in the steering wheel, leaking power steering fluid, worn track rod ends, and damaged steering rack. These affect vehicle control and are closely related to suspension wear. Typical repair costs: £150–600. Pre-MOT check: Check for excessive steering wheel play (more than a few inches of free movement). Listen for whining from the power steering pump. Look for fluid leaks under the car near the front wheels.

Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue