2007 Derbi Senda MOT Pass Rate
Pass rate for Senda models manufactured in 2007, based on 589 real MOT test results.
Data from official DVSA MOT testing records
This page shows all Senda cars tested in 2007. Want to see how cars built in 2007 hold up over time?
View 2007 Derbi Senda vintage page → (54.5% current pass rate)2007 Derbi Senda MOT Analysis
The 2007 Derbi Senda has an MOT pass rate of 51.4% based on 589 tests — below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 12,659 miles on the odometer. With a 48.6% failure rate, the 2007 Senda is rated as "Poor" for MOT reliability.
The leading cause of MOT failure for the 2007 Derbi Senda is Motorcycle structure and attachments, responsible for 1.4% of failures. Motorcycle structure and attachments issues are a common cause of MOT failure. Regular inspection and maintenance of these components helps ensure your vehicle passes its MOT. Typical repair costs range from £100–400. Motorcycle brakes is the second most common issue at 0.8%. Motorcycle suspension follows at 0.3%.
Top failures specific to 2007 models only. The overall Senda page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Motorcycle Structure And Attachments | 1.4% | 8 |
| 2 | Motorcycle Brakes | 0.8% | 5 |
| 3 | Motorcycle Suspension | 0.3% | 2 |
| 4 | Motorcycle Lamps And Reflectors | 0.3% | 2 |
Failures per 10,000 Miles
avg. 12,659 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Motorcycle structure and attachments | 1.07 | 1.4% | 8 |
| Motorcycle brakes | 0.67 | 0.8% | 5 |
| Motorcycle suspension | 0.27 | 0.3% | 2 |
| Motorcycle lamps and reflectors | 0.27 | 0.3% | 2 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2007 Derbi Senda has an MOT pass rate of 51.4% based on 589 tests — below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 12,659 miles on the odometer. With a 48.6% failure rate, the 2007 Senda is rated as "Poor" for MOT reliability.
If you own or are considering buying a 2007 Derbi Senda, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to motorcycle structure and attachments: Have this system checked during regular servicing. Look for warning signs like unusual noises, vibrations, or dashboard warning lights. With relatively low average mileage of 12,659 miles, many of these vehicles are still in good mechanical condition.
Motorcycle structure and attachments — 1.4% of failures
Motorcycle structure and attachments issues account for 1.4% of MOT failures on 2007 Derbi Senda models. Motorcycle structure and attachments issues are a common cause of MOT failure. Regular inspection and maintenance of these components helps ensure your vehicle passes its MOT. Typical repair costs: £100–400. Pre-MOT check: Have this system checked during regular servicing. Look for warning signs like unusual noises, vibrations, or dashboard warning lights.
Motorcycle brakes — 0.8% of failures
Motorcycle brakes issues account for 0.8% of MOT failures on 2007 Derbi Senda models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Motorcycle suspension — 0.3% of failures
Motorcycle suspension issues account for 0.3% of MOT failures on 2007 Derbi Senda models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.