2008 Direct Bikes Db50qt/5 MOT Pass Rate
Pass rate for Db50qt/5 models manufactured in 2008, based on 56 real MOT test results.
Data from official DVSA MOT testing records
2008 Direct Bikes Db50qt/5 MOT Analysis
The 2008 Direct Bikes Db50qt/5 has an MOT pass rate of 60.7% based on 56 tests — around the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 3,755 miles on the odometer. With a 39.3% failure rate, the 2008 Db50qt/5 is rated as "Average" for MOT reliability.
The leading cause of MOT failure for the 2008 Direct Bikes Db50qt/5 is Motorcycle body and structure, responsible for 1.8% of failures. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs range from £100–500+. Motorcycle fuel and exhaust is the second most common issue at 1.8%. Motorcycle steering and suspension follows at 1.8%.
Top failures specific to 2008 models only. The overall Db50qt/5 page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Motorcycle Body And Structure | 1.8% | 1 |
| 2 | Motorcycle Fuel And Exhaust | 1.8% | 1 |
| 3 | Motorcycle Steering And Suspension | 1.8% | 1 |
Mileage Statistics
About This Data
The 2008 Direct Bikes Db50qt/5 has an MOT pass rate of 60.7% based on 56 tests — around the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 3,755 miles on the odometer. With a 39.3% failure rate, the 2008 Db50qt/5 is rated as "Average" for MOT reliability.
If you own or are considering buying a 2008 Direct Bikes Db50qt/5, budget for potential repairs before each MOT. Before your MOT, pay particular attention to motorcycle body and structure: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely. With relatively low average mileage of 3,755 miles, many of these vehicles are still in good mechanical condition.
Motorcycle body and structure — 1.8% of failures
Motorcycle body and structure issues account for 1.8% of MOT failures on 2008 Direct Bikes Db50qt/5 models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Motorcycle fuel and exhaust — 1.8% of failures
Motorcycle fuel and exhaust issues account for 1.8% of MOT failures on 2008 Direct Bikes Db50qt/5 models. Motorcycle fuel and exhaust issues are a common cause of MOT failure. Regular inspection and maintenance of these components helps ensure your vehicle passes its MOT. Typical repair costs: £100–400. Pre-MOT check: Have this system checked during regular servicing. Look for warning signs like unusual noises, vibrations, or dashboard warning lights.
Motorcycle steering and suspension — 1.8% of failures
Motorcycle steering and suspension issues account for 1.8% of MOT failures on 2008 Direct Bikes Db50qt/5 models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.