2012 Ducati Hypermotard MOT Pass Rate
Pass rate for Hypermotard models manufactured in 2012, based on 62 real MOT test results.
Data from official DVSA MOT testing records
2012 Ducati Hypermotard MOT Analysis
The 2012 Ducati Hypermotard has an MOT pass rate of 91.9% based on 62 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 8,032 miles on the odometer. With a 8.1% failure rate, the 2012 Hypermotard is rated as "Excellent" for MOT reliability.
The leading cause of MOT failure for the 2012 Ducati Hypermotard is Identification of the vehicle, responsible for 1.6% of failures. Identification failures relate to the Vehicle Identification Number (VIN) and registration plate. The VIN must be permanently displayed and legible, and the registration plate must meet British Standard formatting. Typical repair costs range from £10–50. Motorcycle tyres is the second most common issue at 1.6%.
Top failures specific to 2012 models only. The overall Hypermotard page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Identification Of The Vehicle | 1.6% | 1 |
| 2 | Motorcycle Tyres | 1.6% | 1 |
Failures per 10,000 Miles
avg. 8,032 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Identification of the vehicle | 2.01 | 1.6% | 1 |
| Motorcycle tyres | 2.01 | 1.6% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2012 Ducati Hypermotard has an MOT pass rate of 91.9% based on 62 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 8,032 miles on the odometer. With a 8.1% failure rate, the 2012 Hypermotard is rated as "Excellent" for MOT reliability.
If you own or are considering buying a 2012 Ducati Hypermotard, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to identification of the vehicle: Ensure the VIN plate is visible and legible (usually in the windscreen or under the bonnet). Check that number plates are clean, undamaged, and use the correct font and spacing. With relatively low average mileage of 8,032 miles, many of these vehicles are still in good mechanical condition.
Identification of the vehicle — 1.6% of failures
Identification of the vehicle issues account for 1.6% of MOT failures on 2012 Ducati Hypermotard models. Identification failures relate to the Vehicle Identification Number (VIN) and registration plate. The VIN must be permanently displayed and legible, and the registration plate must meet British Standard formatting. Typical repair costs: £10–50. Pre-MOT check: Ensure the VIN plate is visible and legible (usually in the windscreen or under the bonnet). Check that number plates are clean, undamaged, and use the correct font and spacing.
Motorcycle tyres — 1.6% of failures
Motorcycle tyres issues account for 1.6% of MOT failures on 2012 Ducati Hypermotard models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: £50–200 per tyre. Pre-MOT check: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.