Skip to main content
Pass Your MOT

1990 Ferrari 348 MOT Pass Rate

Pass rate for 348 models manufactured in 1990, based on 762 real MOT test results.

87.5%
Pass Rate
12.5%
Fail Rate
762
Total Tests
43,111
Avg Mileage

Data from official DVSA MOT testing records

This page shows all 348 cars tested in 1990. Want to see how cars built in 1990 hold up over time?

View 1990 Ferrari 348 vintage page โ†’ (96.8% current pass rate)

1990 Ferrari 348 MOT Analysis

The 1990 Ferrari 348 has an MOT pass rate of 87.5% based on 762 tests โ€” well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 43,111 miles on the odometer. With a 12.5% failure rate, the 1990 348 is rated as "Excellent" for MOT reliability.

The leading cause of MOT failure for the 1990 Ferrari 348 is Lamps, reflectors and electrical equipment, responsible for 0.5% of failures. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs range from ยฃ5โ€“50. Brakes is the second most common issue at 0.3%.

Top failures specific to 1990 models only. The overall 348 page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Lamps, Reflectors And Electrical Equipment0.5%4
2Brakes0.3%2

Failures per 10,000 Miles

avg. 43,111 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Lamps & Electrical0.12% per 10K miBrakes0.06% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Lamps & Electrical0.120.5%4
Brakes0.060.3%2

Mileage Statistics

43,111
Mean
36,405
Median
31,329
25th Percentile
40,691
75th Percentile
2.90% failures per 10K miles

Mileage-adjusted failure rate โ€” accounts for how much this model year is typically driven.

About This Data

The 1990 Ferrari 348 has an MOT pass rate of 87.5% based on 762 tests โ€” well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 43,111 miles on the odometer. With a 12.5% failure rate, the 1990 348 is rated as "Excellent" for MOT reliability.

If you own or are considering buying a 1990 Ferrari 348, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to lamps, reflectors and electrical equipment: Walk around the car and check every light โ€” headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test. With relatively low average mileage of 43,111 miles, many of these vehicles are still in good mechanical condition.

Lamps, reflectors and electrical equipment โ€” 0.5% of failures

Lamps, reflectors and electrical equipment issues account for 0.5% of MOT failures on 1990 Ferrari 348 models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: ยฃ5โ€“50. Pre-MOT check: Walk around the car and check every light โ€” headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Brakes โ€” 0.3% of failures

Brakes issues account for 0.3% of MOT failures on 1990 Ferrari 348 models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ€” any brake deficiency will result in an MOT fail. Typical repair costs: ยฃ150โ€“400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel โ€” if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Based on DVSA anonymised MOT test data (2005โ€“2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue