Skip to main content
Pass Your MOT

2012 Fiat 500 C MOT Pass Rate

Pass rate for 500 C models manufactured in 2012, based on 10,172 real MOT test results.

72.4%
Pass Rate
27.6%
Fail Rate
10,172
Total Tests
38,699
Avg Mileage

Data from official DVSA MOT testing records

This page shows all 500 C cars tested in 2012. Want to see how cars built in 2012 hold up over time?

View 2012 Fiat 500 C vintage page โ†’ (66.5% current pass rate)

2012 Fiat 500 C MOT Analysis

The 2012 Fiat 500 C has an MOT pass rate of 72.4% based on 10,172 tests โ€” above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 38,699 miles on the odometer. With a 27.6% failure rate, the 2012 500 C is rated as "Very Good" for MOT reliability.

The leading cause of MOT failure for the 2012 Fiat 500 C is Suspension, responsible for 2.9% of failures. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs range from ยฃ200โ€“500. Brakes is the second most common issue at 1.7%. Tyres follows at 1.4%.

Top failures specific to 2012 models only. The overall 500 C page may show different rankings.

What Fails Most

Suspension 2.9%
Brakes 1.7%
Tyres 1.4%

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Suspension2.9%292
2Brakes1.7%171
3Tyres1.4%141
4Lamps, Reflectors And Electrical Equipment1.1%110
5Body, Chassis, Structure1.0%97
6Noise, Emissions And Leaks0.7%74
7Visibility0.4%44
8Non-component Advisories0.1%11
9Identification Of The Vehicle0.1%8

Failures per 10,000 Miles

avg. 38,699 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Suspension0.74% per 10K miBrakes0.43% per 10K miTyres0.36% per 10K miLamps & Electrical0.28% per 10K miBody & Structure0.25% per 10K miNoise, emissions and leaks0.19% per 10K miVisibility0.11% per 10K miNon-component advisories0.03% per 10K miIdentification of the vehicle0.02% per 10K miSeat Belts0.01% per 10K miWheels0.01% per 10K miSteering0.01% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Suspension0.742.9%292
Brakes0.431.7%171
Tyres0.361.4%141
Lamps & Electrical0.281.1%110
Body & Structure0.251.0%97
Noise, emissions and leaks0.190.7%74
Visibility0.110.4%44
Non-component advisories0.030.1%11
Identification of the vehicle0.020.1%8
Seat Belts0.010.0%4
Wheels0.010.0%3
Steering0.010.0%2

Mileage Statistics

38,699
Mean
17,149
Median
12,774
25th Percentile
26,507
75th Percentile
7.13% failures per 10K miles

Mileage-adjusted failure rate โ€” accounts for how much this model year is typically driven.

About This Data

The 2012 Fiat 500 C has an MOT pass rate of 72.4% based on 10,172 tests โ€” above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 38,699 miles on the odometer. With a 27.6% failure rate, the 2012 500 C is rated as "Very Good" for MOT reliability.

If you own or are considering buying a 2012 Fiat 500 C, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to suspension: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks. With relatively low average mileage of 38,699 miles, many of these vehicles are still in good mechanical condition.

Suspension โ€” 2.9% of failures

Suspension issues account for 2.9% of MOT failures on 2012 Fiat 500 C models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: ยฃ200โ€“500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.

Brakes โ€” 1.7% of failures

Brakes issues account for 1.7% of MOT failures on 2012 Fiat 500 C models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ€” any brake deficiency will result in an MOT fail. Typical repair costs: ยฃ150โ€“400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel โ€” if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Tyres โ€” 1.4% of failures

Tyres issues account for 1.4% of MOT failures on 2012 Fiat 500 C models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: ยฃ50โ€“200 per tyre. Pre-MOT check: Check tread depth with a 20p coin โ€” if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.

Based on DVSA anonymised MOT test data (2005โ€“2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue