Skip to main content
Pass Your MOT

2008 Fiat Panda 4x4 MOT Pass Rate

Pass rate for Panda 4x4 models manufactured in 2008, based on 50 real MOT test results.

66.0%
Pass Rate
34.0%
Fail Rate
50
Total Tests
41,770
Avg Mileage

Data from official DVSA MOT testing records

2008 Fiat Panda 4x4 MOT Analysis

The 2008 Fiat Panda 4x4 has an MOT pass rate of 66.0% based on 50 tests — slightly above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 41,770 miles on the odometer. With a 34.0% failure rate, the 2008 Panda 4x4 is rated as "Good" for MOT reliability.

The leading cause of MOT failure for the 2008 Fiat Panda 4x4 is Suspension, responsible for 6.0% of failures. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs range from £200–500. Tyres is the second most common issue at 4.0%. Exhaust, Fuel and Emissions follows at 2.0%.

⚠ Based on limited data (50 tests)

Top failures specific to 2008 models only. The overall Panda 4x4 page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Suspension6.0%3
2Tyres4.0%2
3Exhaust, Fuel And Emissions2.0%1

Failures per 10,000 Miles

avg. 41,770 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Suspension1.44% per 10K miTyres0.96% per 10K miEmissions & Exhaust0.48% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Suspension1.446.0%3
Tyres0.964.0%2
Emissions & Exhaust0.482.0%1

Mileage Statistics

41,770
Mean
45,418
Median
27,546
25th Percentile
57,086
75th Percentile
8.14% failures per 10K miles

Mileage-adjusted failure rate — accounts for how much this model year is typically driven.

About This Data

The 2008 Fiat Panda 4x4 has an MOT pass rate of 66.0% based on 50 tests — slightly above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 41,770 miles on the odometer. With a 34.0% failure rate, the 2008 Panda 4x4 is rated as "Good" for MOT reliability.

If you own or are considering buying a 2008 Fiat Panda 4x4, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to suspension: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks. With relatively low average mileage of 41,770 miles, many of these vehicles are still in good mechanical condition.

Suspension — 6.0% of failures

Suspension issues account for 6.0% of MOT failures on 2008 Fiat Panda 4x4 models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.

Tyres — 4.0% of failures

Tyres issues account for 4.0% of MOT failures on 2008 Fiat Panda 4x4 models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: £50–200 per tyre. Pre-MOT check: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.

Exhaust, Fuel and Emissions — 2.0% of failures

Exhaust, Fuel and Emissions issues account for 2.0% of MOT failures on 2008 Fiat Panda 4x4 models. Emissions failures occur when exhaust gases exceed legal limits for carbon monoxide (CO), hydrocarbons (HC), or particulate matter (diesel). Common causes include faulty oxygen sensors, clogged catalytic converters, or DPF issues on diesel vehicles. Typical repair costs: £100–1,000+. Pre-MOT check: If the engine management light is on, get it diagnosed before the MOT. For diesel cars, ensure the DPF has completed a regeneration cycle. Regular servicing and using premium fuel before the test can help.

Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue