Skip to main content
Pass Your MOT

2010 Fiat Sedici MOT Pass Rate

Pass rate for Sedici models manufactured in 2010, based on 51 real MOT test results.

78.4%
Pass Rate
21.6%
Fail Rate
51
Total Tests
51,494
Avg Mileage

Data from official DVSA MOT testing records

2010 Fiat Sedici MOT Analysis

The 2010 Fiat Sedici has an MOT pass rate of 78.4% based on 51 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 51,494 miles on the odometer. With a 21.6% failure rate, the 2010 Sedici is rated as "Excellent" for MOT reliability.

The leading cause of MOT failure for the 2010 Fiat Sedici is Suspension, responsible for 9.8% of failures. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs range from £200–500. Tyres is the second most common issue at 5.9%. Visibility follows at 3.9%.

⚠ Based on limited data (51 tests)

Top failures specific to 2010 models only. The overall Sedici page may show different rankings.

What Fails Most

Suspension 9.8%
Tyres 5.9%
Visibility 3.9%

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Suspension9.8%5
2Tyres5.9%3
3Visibility3.9%2
4Steering2.0%1
5Non-component Advisories2.0%1
6Seat Belts And Supplementary Restraint Systems2.0%1

Failures per 10,000 Miles

avg. 51,494 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Suspension1.90% per 10K miTyres1.14% per 10K miVisibility0.76% per 10K miSteering0.38% per 10K miNon-component advisories0.38% per 10K miSeat Belts0.38% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Suspension1.909.8%5
Tyres1.145.9%3
Visibility0.763.9%2
Steering0.382.0%1
Non-component advisories0.382.0%1
Seat Belts0.382.0%1

Mileage Statistics

51,494
Mean
30,308
Median
13,392
25th Percentile
78,567
75th Percentile
4.19% failures per 10K miles

Mileage-adjusted failure rate — accounts for how much this model year is typically driven.

About This Data

The 2010 Fiat Sedici has an MOT pass rate of 78.4% based on 51 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 51,494 miles on the odometer. With a 21.6% failure rate, the 2010 Sedici is rated as "Excellent" for MOT reliability.

If you own or are considering buying a 2010 Fiat Sedici, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to suspension: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks. At 51,494 average miles, these vehicles are in the mid-range where component wear starts to become a factor.

Suspension — 9.8% of failures

Suspension issues account for 9.8% of MOT failures on 2010 Fiat Sedici models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.

Tyres — 5.9% of failures

Tyres issues account for 5.9% of MOT failures on 2010 Fiat Sedici models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: £50–200 per tyre. Pre-MOT check: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.

Visibility — 3.9% of failures

Visibility issues account for 3.9% of MOT failures on 2010 Fiat Sedici models. Visibility failures relate to the windscreen, wipers, washers, mirrors, and view-obstructing damage. Cracks in the windscreen swept area, ineffective wipers, or empty washer bottles are common causes. Typical repair costs: £10–300. Pre-MOT check: Check the windscreen for chips and cracks — damage larger than 10mm in the driver's swept area or 40mm elsewhere will fail. Test washers and wipers. Ensure both door mirrors are intact and adjustable.

Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue