2020 Fiat Sunlight MOT Pass Rate
Pass rate for Sunlight models manufactured in 2020, based on 101 real MOT test results.
Data from official DVSA MOT testing records
This page shows all Sunlight cars tested in 2020. Want to see how cars built in 2020 hold up over time?
View 2020 Fiat Sunlight vintage page → (96.4% current pass rate)2020 Fiat Sunlight MOT Analysis
The 2020 Fiat Sunlight has an MOT pass rate of 90.1% based on 101 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 12,046 miles on the odometer. With a 9.9% failure rate, the 2020 Sunlight is rated as "Excellent" for MOT reliability.
The leading cause of MOT failure for the 2020 Fiat Sunlight is Tyres, responsible for 3.0% of failures. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs range from £50–200 per tyre. Visibility is the second most common issue at 2.0%. Seat belts and supplementary restraint systems follows at 1.0%.
Top failures specific to 2020 models only. The overall Sunlight page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Tyres | 3.0% | 3 |
| 2 | Visibility | 2.0% | 2 |
| 3 | Seat Belts And Supplementary Restraint Systems | 1.0% | 1 |
Failures per 10,000 Miles
avg. 12,046 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Tyres | 2.47 | 3.0% | 3 |
| Visibility | 1.64 | 2.0% | 2 |
| Seat Belts | 0.82 | 1.0% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2020 Fiat Sunlight has an MOT pass rate of 90.1% based on 101 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 12,046 miles on the odometer. With a 9.9% failure rate, the 2020 Sunlight is rated as "Excellent" for MOT reliability.
If you own or are considering buying a 2020 Fiat Sunlight, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to tyres: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating. With relatively low average mileage of 12,046 miles, many of these vehicles are still in good mechanical condition.
Tyres — 3.0% of failures
Tyres issues account for 3.0% of MOT failures on 2020 Fiat Sunlight models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: £50–200 per tyre. Pre-MOT check: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.
Visibility — 2.0% of failures
Visibility issues account for 2.0% of MOT failures on 2020 Fiat Sunlight models. Visibility failures relate to the windscreen, wipers, washers, mirrors, and view-obstructing damage. Cracks in the windscreen swept area, ineffective wipers, or empty washer bottles are common causes. Typical repair costs: £10–300. Pre-MOT check: Check the windscreen for chips and cracks — damage larger than 10mm in the driver's swept area or 40mm elsewhere will fail. Test washers and wipers. Ensure both door mirrors are intact and adjustable.
Seat belts and supplementary restraint systems — 1.0% of failures
Seat belts and supplementary restraint systems issues account for 1.0% of MOT failures on 2020 Fiat Sunlight models. Seat belt failures include frayed or cut webbing, faulty retractors, buckles that don't latch properly, and missing or damaged anchorages. All fitted seat belts must be functional. Typical repair costs: £50–200 per belt. Pre-MOT check: Pull each seat belt fully out and check for fraying, cuts, or fading. Ensure each belt retracts smoothly and the buckle clicks securely. Check the pre-tensioner warning light on the dashboard.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.