Skip to main content
Pass Your MOT

1996 Fiat Tempra MOT Pass Rate

Pass rate for Tempra models manufactured in 1996, based on 187 real MOT test results.

42.2%
Pass Rate
57.8%
Fail Rate
187
Total Tests
92,700
Avg Mileage

Data from official DVSA MOT testing records

This page shows all Tempra cars tested in 1996. Want to see how cars built in 1996 hold up over time?

View 1996 Fiat Tempra vintage page โ†’ (50.0% current pass rate)

1996 Fiat Tempra MOT Analysis

The 1996 Fiat Tempra has an MOT pass rate of 42.2% based on 187 tests โ€” significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 92,700 miles on the odometer. With a 57.8% failure rate, the 1996 Tempra is rated as "Very Poor" for MOT reliability.

The leading cause of MOT failure for the 1996 Fiat Tempra is Brakes, responsible for 1.1% of failures. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ€” any brake deficiency will result in an MOT fail. Typical repair costs range from ยฃ150โ€“400. Seat belts and supplementary restraint systems is the second most common issue at 1.1%. Noise, emissions and leaks follows at 0.5%.

Top failures specific to 1996 models only. The overall Tempra page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Brakes1.1%2
2Seat Belts And Supplementary Restraint Systems1.1%2
3Noise, Emissions And Leaks0.5%1

Failures per 10,000 Miles

avg. 92,700 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Brakes0.12% per 10K miSeat Belts0.12% per 10K miNoise, emissions and leaks0.06% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Brakes0.121.1%2
Seat Belts0.121.1%2
Noise, emissions and leaks0.060.5%1

Mileage Statistics

92,700
Mean
104,360
Median
89,356
25th Percentile
116,217
75th Percentile
6.24% failures per 10K miles

Mileage-adjusted failure rate โ€” accounts for how much this model year is typically driven.

About This Data

The 1996 Fiat Tempra has an MOT pass rate of 42.2% based on 187 tests โ€” significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 92,700 miles on the odometer. With a 57.8% failure rate, the 1996 Tempra is rated as "Very Poor" for MOT reliability.

If you own or are considering buying a 1996 Fiat Tempra, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to brakes: Listen for squealing or grinding noises. Check brake pedal feel โ€” if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm). With an average mileage of 92,700 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.

Brakes โ€” 1.1% of failures

Brakes issues account for 1.1% of MOT failures on 1996 Fiat Tempra models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ€” any brake deficiency will result in an MOT fail. Typical repair costs: ยฃ150โ€“400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel โ€” if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Seat belts and supplementary restraint systems โ€” 1.1% of failures

Seat belts and supplementary restraint systems issues account for 1.1% of MOT failures on 1996 Fiat Tempra models. Seat belt failures include frayed or cut webbing, faulty retractors, buckles that don't latch properly, and missing or damaged anchorages. All fitted seat belts must be functional. Typical repair costs: ยฃ50โ€“200 per belt. Pre-MOT check: Pull each seat belt fully out and check for fraying, cuts, or fading. Ensure each belt retracts smoothly and the buckle clicks securely. Check the pre-tensioner warning light on the dashboard.

Noise, emissions and leaks โ€” 0.5% of failures

Noise, emissions and leaks issues account for 0.5% of MOT failures on 1996 Fiat Tempra models. Emissions failures occur when exhaust gases exceed legal limits for carbon monoxide (CO), hydrocarbons (HC), or particulate matter (diesel). Common causes include faulty oxygen sensors, clogged catalytic converters, or DPF issues on diesel vehicles. Typical repair costs: ยฃ100โ€“1,000+. Pre-MOT check: If the engine management light is on, get it diagnosed before the MOT. For diesel cars, ensure the DPF has completed a regeneration cycle. Regular servicing and using premium fuel before the test can help.

Based on DVSA anonymised MOT test data (2005โ€“2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue