2010 Ford Freeda MOT Pass Rate
Pass rate for Freeda models manufactured in 2010, based on 31 real MOT test results.
Data from official DVSA MOT testing records
2010 Ford Freeda MOT Analysis
The 2010 Ford Freeda has an MOT pass rate of 41.9% based on 31 tests — significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 131,109 miles on the odometer. With a 58.1% failure rate, the 2010 Freeda is rated as "Very Poor" for MOT reliability.
The leading cause of MOT failure for the 2010 Ford Freeda is Suspension, responsible for 16.1% of failures. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs range from £200–500. Noise, emissions and leaks is the second most common issue at 9.7%. Body, chassis, structure follows at 3.2%.
Top failures specific to 2010 models only. The overall Freeda page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Suspension | 16.1% | 5 |
| 2 | Noise, Emissions And Leaks | 9.7% | 3 |
| 3 | Body, Chassis, Structure | 3.2% | 1 |
Failures per 10,000 Miles
avg. 131,109 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Suspension | 1.23 | 16.1% | 5 |
| Noise, emissions and leaks | 0.74 | 9.7% | 3 |
| Body & Structure | 0.25 | 3.2% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2010 Ford Freeda has an MOT pass rate of 41.9% based on 31 tests — significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 131,109 miles on the odometer. With a 58.1% failure rate, the 2010 Freeda is rated as "Very Poor" for MOT reliability.
If you own or are considering buying a 2010 Ford Freeda, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to suspension: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks. With an average mileage of 131,109 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.
Suspension — 16.1% of failures
Suspension issues account for 16.1% of MOT failures on 2010 Ford Freeda models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Noise, emissions and leaks — 9.7% of failures
Noise, emissions and leaks issues account for 9.7% of MOT failures on 2010 Ford Freeda models. Emissions failures occur when exhaust gases exceed legal limits for carbon monoxide (CO), hydrocarbons (HC), or particulate matter (diesel). Common causes include faulty oxygen sensors, clogged catalytic converters, or DPF issues on diesel vehicles. Typical repair costs: £100–1,000+. Pre-MOT check: If the engine management light is on, get it diagnosed before the MOT. For diesel cars, ensure the DPF has completed a regeneration cycle. Regular servicing and using premium fuel before the test can help.
Body, chassis, structure — 3.2% of failures
Body, chassis, structure issues account for 3.2% of MOT failures on 2010 Ford Freeda models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.