Skip to main content
Pass Your MOT

2007 Ford Fusion MOT Pass Rate

Pass rate for Fusion models manufactured in 2007, based on 150,414 real MOT test results.

69.7%
Pass Rate
30.3%
Fail Rate
150,414
Total Tests
57,585
Avg Mileage

Data from official DVSA MOT testing records

This page shows all Fusion cars tested in 2007. Want to see how cars built in 2007 hold up over time?

View 2007 Ford Fusion vintage page โ†’ (59.2% current pass rate)

2007 Ford Fusion MOT Analysis

The 2007 Ford Fusion has an MOT pass rate of 69.7% based on 150,414 tests โ€” slightly above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 57,585 miles on the odometer. With a 30.3% failure rate, the 2007 Fusion is rated as "Good" for MOT reliability.

The leading cause of MOT failure for the 2007 Ford Fusion is Brakes, responsible for 1.9% of failures. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ€” any brake deficiency will result in an MOT fail. Typical repair costs range from ยฃ150โ€“400. Lamps, reflectors and electrical equipment is the second most common issue at 1.9%. Suspension follows at 1.5%.

Top failures specific to 2007 models only. The overall Fusion page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Brakes1.9%2,887
2Lamps, Reflectors And Electrical Equipment1.9%2,849
3Suspension1.5%2,243
4Tyres1.1%1,675
5Body, Chassis, Structure0.5%741
6Noise, Emissions And Leaks0.5%709
7Visibility0.4%658
8Steering0.3%409
9Non-component Advisories0.2%314
10Identification Of The Vehicle0.2%228
11Road Wheels0.1%91

Failures per 10,000 Miles

avg. 57,585 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Brakes0.33% per 10K miLamps & Electrical0.33% per 10K miSuspension0.26% per 10K miTyres0.19% per 10K miBody & Structure0.09% per 10K miNoise, emissions and leaks0.08% per 10K miVisibility0.08% per 10K miSteering0.05% per 10K miNon-component advisories0.04% per 10K miIdentification of the vehicle0.03% per 10K miWheels0.01% per 10K miSeat Belts0.01% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Brakes0.331.9%2,887
Lamps & Electrical0.331.9%2,849
Suspension0.261.5%2,243
Tyres0.191.1%1,675
Body & Structure0.090.5%741
Noise, emissions and leaks0.080.5%709
Visibility0.080.4%658
Steering0.050.3%409
Non-component advisories0.040.2%314
Identification of the vehicle0.030.2%228
Wheels0.010.1%91
Seat Belts0.010.0%67

Mileage Statistics

57,585
Mean
29,551
Median
14,862
25th Percentile
37,399
75th Percentile
5.26% failures per 10K miles

Mileage-adjusted failure rate โ€” accounts for how much this model year is typically driven.

About This Data

The 2007 Ford Fusion has an MOT pass rate of 69.7% based on 150,414 tests โ€” slightly above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 57,585 miles on the odometer. With a 30.3% failure rate, the 2007 Fusion is rated as "Good" for MOT reliability.

If you own or are considering buying a 2007 Ford Fusion, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to brakes: Listen for squealing or grinding noises. Check brake pedal feel โ€” if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm). At 57,585 average miles, these vehicles are in the mid-range where component wear starts to become a factor.

Brakes โ€” 1.9% of failures

Brakes issues account for 1.9% of MOT failures on 2007 Ford Fusion models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ€” any brake deficiency will result in an MOT fail. Typical repair costs: ยฃ150โ€“400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel โ€” if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Lamps, reflectors and electrical equipment โ€” 1.9% of failures

Lamps, reflectors and electrical equipment issues account for 1.9% of MOT failures on 2007 Ford Fusion models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: ยฃ5โ€“50. Pre-MOT check: Walk around the car and check every light โ€” headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Suspension โ€” 1.5% of failures

Suspension issues account for 1.5% of MOT failures on 2007 Ford Fusion models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: ยฃ200โ€“500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.

Based on DVSA anonymised MOT test data (2005โ€“2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue